High Frequency Dryer For Corner Ring Insulation Cardboard
Explore More Insulation Cardboard Drying Machines Products
The high-frequency drying equipment developed by our company for high voltage transformer's insulation board
It is an advanced process method to dry and mold the insulated board with high-frequency electric field.
This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods.
The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in function. For many years, it has been applied to a large number of large enterprises at home and abroad. All get well received by users both at home and abroad.
Unlike traditional heating, high-frequency heating uses the strong penetration ability of high-frequency electric field (high-frequency electric field penetrability is far stronger than microwave), which makes the material molecules repeatedly polarized, resulting in severe friction and self-heating from inside to outside. It does not require any preheating and heat conduction, so its heating efficiency is very high.
In addition, high-frequency heating is superior to traditional drying and microwave drying, that is, the electric field can realize selective heating through mold, concentrate energy on the location where heat is needed, and further avoid unnecessary consumption.
Therefore, it can not only greatly save energy, but also greatly shorten the heating time and improve the production efficiency.
Angle ring heating time usually chord length 550mm and thickness 2.5-3mm of not more than 6 minutes, chord 700mm angle ring heating time is 8 minutes. If the multi-layer material is dried together at the same time, the cost will be reduced more.
Because in the heating process, the material of the water evaporated quickly, and the heat dissipation condition is better than the inner surface, the inner temperature will be slightly higher than the outer layer, according to the material drying theory: with heating process, maintain steam pressure and heat transfer in the same direction is most conducive to the drying of materials.
This heating method not only makes the internal fast and thorough but also completely avoids the phenomenon of the external coke.
Because of the high-frequency electric field heating both inside and outside, it is more suitable for the insulation material or multi-layer material to be heated at the same time.
When the material is heated in the high-frequency electric field, the equipment will put pressure on the mold, so that the material in the water was a lot of extrusion and molding in the electric heating at the same time.
In this process, if the material itself contains impurities like metal powder with low insulating, impurity will produce high temperature overheating and even breakdown insulating board in the high-frequency electrical field. At this time the equipment will warn alert，and start the protection system so that the disqualified material is eliminated during the heating process.
Ensure the quality of the product so that it is suitable for higher insulation requirements.
This high-frequency drying equipment does not require any auxiliary equipment. After electrifying and material loading, the whole drying process can be completed by pressing a button. The operation is very simple.
There is no pollution to the environment. Without any dust, smoke or high temperature.
The national high-frequency electric field leakage standard: 25V/m, our company's equipment is tightly shielded by various protection technologies. The measured leakage value is only 0.2-1V/m, which is 20 times better than the national standard. Effectively protect the human body and protect other equipment from the high-frequency electric field.
Liaoning Unify High-Frequency Equipment Co., Ltd. is a renowned Chinese welding machine supplier, we provide high frequency welding pvc, hf welder for sale, high frequency pvc welder, cardboard insulationand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Inflatable Products Welders | The scope of high-frequencyinflatable welding machinein LiaoningYufei company can be used as follows: inflated Toys welding medical bag Welding ; A... |
 |
Medical Bags Welders | Liaoning Yufei high-frequency welding equipment co,.ltd has been developing and manufacturing machines for the medical industry for over 60 years. ... |
 |
HF Membrane Welders-2019 | The membranes hf pvc welding machinein Liaoning Yufei company is created with our customers for our clients. It's perfect for production enhancem... |
 |
Inflatable Products Welders | The scope of inflatable product high-frequency welding machine in LiaoningYufei company can be used as follows: inflated Toys welding medical bag... |
 |
Industrial Belt Welder | Mainly application ofIndustrial Belt Welder Used for industrial belt skirt and belt baffles welding, welding industrial conveyor belt conveyor ... |
Same products
 |
MECHANIC 10cc 焊膏助焊剂，适用于手机 SMT PCB 焊接 | 卖方: Phonefix | MECHANIC 注射器式焊膏 (Sn63/Pb37)，适用于手机 BGA 和 SMT 维修。这款 10cc 锡膏包含一个注射器和三根针头，方便在元件焊接过程中精确涂抹于 PCB 焊盘上。 产... |
 |
YCS M.Y 140/160/183/199°C Solder Paste for Phone PCB IC Repair | 卖方: China PHONEFIX Technology Co., Ltd | YCS M.Y-XJ01 140℃/160℃/183℃/199℃ 高温焊膏，适用于手机PCB、CPU、IC及电子元件球形贴片的维修。YCS M.Y焊膏采用先进配方技术，提供卓越的焊接效果。杨师傅... |
 |
MECHANIC T210 SE 数字显示焊台适用于精密 PCB 维修 | 卖方: Phonefix | MECHANIC T210 SE 50W 数字显示恒温焊台，支持 C210 系列烙铁头，具备三档温度存储和智能自动休眠功能，5 秒快速加热，6 秒即可熔化锡，适用于手机主板维修、电子产品电路板维... |
|
|
SUNSHINE SS-6604 SS-6605 Soldering Smoke Purifier Fume Extractor | 卖方: China PHONEFIX Technology Co., Ltd | 产品描述 SUNSHINE SS-6604 SS-66045 烟雾净化器，适用于手机维修、焊接、激光雕刻等行业。这款强大的烟雾净化器可有效去除铅烟、松香、烟雾和异味等有害物质。它可与激光机和焊台... |
 |
MECHANIC M35 手机主板维修助焊膏 | 卖方: Phonefix | Mechanic M35 10CC 纳米助焊膏活性高达 98%。高效协同配方，为手机主板、BGA 芯片焊接及常规助焊提供卓越的焊接性能。 产品特点： 1. 纯净配方，无杂质，内外通透细腻。 2... |
