1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH2/AH22 Withdrawal Sleeve
1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH2/AH22 Withdrawal Sleeve "Withdrawal(Extraction) sleeves can be used to mount bearings with a tapered bore on cylindrical seats of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or endplates are not supplied with the withdrawal sleeves. To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. To do this, particularly where larger bearings are concerned, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut .Basic design Withdrawal sleeves are slotted and have an external taper of 1:12 except for those in the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for use with wide bearings in the 40 and 41 Dimension Series. The nuts required for dismounting the withdrawal sleeve are not supplied with the sleeve and must be ordered separately. Materials The materials using in withdrawal sleeves are carbon steel with a tensile strength at least 430N /mm2. Dimensions The dimensions of withdrawal sleeves are in accordance with ISO 2982-1:1995. Tolerances The bore diameter of withdrawal sleeves is to tolerance JS9, the width to h13. Thread Withdrawal sleeves up to size 38 have metric threads with 6g tolerances according to ISO 965-3:1998. Larger withdrawal sleeves have metric trapezoidal threads with 7e tolerance according to ISO 2903:1993. If standard nuts are not used, the threads of nuts for withdrawal sleeves up to size 38 should correspond to tolerance 5H according to ISO 965-3:1998. The threads of nuts for larger withdrawal sleeves should correspond to tolerance 7H according to ISO 2903:1993.
Other supplier products
|
|
Lock Washer, Lock Card,1020 steel lock washer, |
Lock Washer, Lock Card,1020 steel lock washer,
Locking washers are simple, stable and reliable fastening elements. The washer engages a keyway in t... |
|
|
1020 steel Lock Nut Sleeve |
1020 steel Lock Nut Sleeve
Locknuts used for bearings and other components fixed to the shaft or adapter sleeve. It also be used to install on the ... |
|
|
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z1 Heave tight coupling Sleeve |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z1 Heave tight coupling Sleeve
The swelling link sets are widely used in heavy load, the mecha... |
|
|
One-Piece Clamping Collar,One-Piece Clamping Collar Recessed Screw,Metric One-Piece Clamping Collar |
One-Piece Clamping Collar,One-Piece Clamping Collar Recessed Screw,Metric One-Piece Clamping Collar
One-Piece Clamping Collars are designed to hand... |
|
|
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z12A Heave tight coupling Sleeve |
1045/1020 steel diameter 200mm~1000mm Conical sleeve,Z12A Heave tight coupling Sleeve The swelling link sets are widely used in heavy load, the mec... |
供应产品
Same products
