串联轴承塑料挤出机轴承 M4CT527 5x27x52mm
The thrust cylindrical roller bearing M4CT527 with size 5x27x52mm, the inner diameter:5 mm, the outer diameter:27mm, the total height:52mm
|
Tandem bearing old code |
Basic size unit(mm) |
Basic load rating Unit (KN) |
|||
|
Inner dia |
Outer dia |
Height |
Cr |
Cor |
|
|
M4CT527 |
5 |
27 |
52 |
40 |
105 |
在线联系供应商
Other supplier products
 |
Wire cable strander equipment 527454 | Single row cylindrical roller bearings Z-527454.ZL with cage are units comprising solid inner and outer rings and cylindrical roller and cage assem... |
 |
JXR699050 370x495x50mm 用于立式车床/中心库存 | 交叉圆锥滚子轴承 JXR699050 370x495x50mm 包含两组滚道和滚子以高角度组合在一起，交替滚子面向相反方向。 横截面的高度与单列轴承相似，以节省空间和轴承座材料。陡角、锥形几何形状导致总有效轴承分布远大于轴承本身的宽度。交叉滚子轴承代号 JXR699050相当于SKF JXR6... |
 |
70BNR10HTYNDUELP4 角接触球轴承70x110x20mm陶瓷球轴承 | 70BNR10HTYNDUELP4球轴承70x110x20mm，采用高速超精密角接触球轴承DU组合结构，用于机床中心，原产地是日本，球材料为陶瓷球轴承。 海关编码：8482102000 轴承型号 70BNR10HTYNDUELP4 轴承尺寸 70x110x20(20*2=40)mm 结构 D... |
 |
RB2008 交叉滚子轴承薄截面20*36*8MM | RB2008轴承尺寸规格：轴承类型 RB2008UUCC0轴承结构 细长交叉滚子轴承尺寸20*36*8MM外径：36mm内径：20mm高度 8mm轴直径：20 毫米内外圈材料GCr15钢滚筒材质GCr15间隙预载轧辊交货时间 有货UU 两面都有封条CCO 负游隙预紧材质GCr15交货时间 有货... |
 |
食品挤出机串联轴承 M4CT30100 四级推力滚轮 30x100x151mm | 串联推力轴承 M4CT30100 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4C... |
Same products
 |
Non standard roller bearing for strander machine 527468.ZL | 卖方: JinHang Precision Bearing Co.,LTD | Special bearings527468 for tubular stranding machines running at high speeds have increased accur... |
 |
Offer Non standard roller bearing for strander machine 535550 | 卖方: JinHang Precision Bearing Co.,LTD | The bearing 535550 belongs to large bearings that have threaded holes for the location of eye bol... |
 |
Cylindrical roller bearing 527467.ZL Tubular twister machine | 卖方: JinHang Precision Bearing Co.,LTD | The dimensional and running tolerances of the bearings with cylindrical bore correspond to tolera... |
 |
Cable strander high speed bearing 808288 factory | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings 808288 with cage are units comprising solid inner and oute... |
 |
Precision bearing 535549 for Tubular stranding machine | 卖方: JinHang Precision Bearing Co.,LTD | High precision bearings 535549 must guide machine parts with high precision and support forces at... |
