Twin screw extrudes tandem roller bearing 7 stages M7CT1880 18x80x200mm
The thrust cylindrical roller bearing M7CT1880 with size 18x80x200mm
, the inner diameter:18mm, the outer diameter:80mm, the total height:200mm
Tandem bearing Basic size unit(mm) Basic load rating
Unit (KN)
Inner dia Outer dia Height Cr Cor
M7CT1880 18 80 200mm 690 2771
在线联系供应商
Other supplier products
| eight stages thrust cylindrical roller bearing M8CT2552YA 25x52x167mm | The thrust cylindrical roller bearing M8CT2552YA with size 25x52x167mm , the inner diameter:25mm, the outer diameter:52mm, the total height:167mm ... | |
| High speed Tubular Stranding Machine use cylindrical roller bearing526720 shaft diameter 850mm | Bearing code 526720 Bearing size Contact Bearing outer dia Contact Bearing inner dia 850mm Bearing height Contact ... | |
| 定制多级串联推力轴承 M6CT2866 尺寸 28x66x162.5mm | 串联推力轴承 M6CT2866 设计用于水平轴应用(挤出机齿轮驱动),必须施加足够的推力载荷以防止滚子滑动。 通常,所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载,并且应避免 C/P 介于 8 和 12 之间的负载。... | |
| VSU250855 回转轴承 955x755x63mm 用于带式输送机无齿 | 描述 VSU 250855 回转球轴承尺寸(ODXIDXH) 955x755x63mm外径(OD) 955 mm内径(ID) 755 mm宽/高/(H) 63 毫米重量 101 公斤材料 42CrMo, 50Mn滚球品牌LYC球HS 海关编码 8482109000包装内包装:塑料薄膜+牛皮纸+... | |
| Wire strander cylindrical roller bearing 526747.ZL | The bearing 526747 with high accuracy rotating, high rigidity support, Low maintence cost. Bearing description:one row cylindrical roller bearing B... |
Same products
| Disposable Blunt Needle With Side Hole (CANNULA) | 卖方: 866413 | The Disposable Blunt Needle With Side Hole (CANNULA) from Zhejiang INI Medical Devices Co., Ltd. ... | |
| Cannula For Hypodermic Needle | 卖方: 866413 | Zhejiang INI Medical Devices Co., Ltd. offers Cannula For Hypodermic Needle, designed for use in ... | |
| 多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-3092-6A项目代码:T-3092-6A结构:基本型串联推力圆柱滚子轴承原产地:中国洛阳润滑:油润滑外形公制尺寸:30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... | |
| 食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-2872-6A项目代码:T-2872-6A原产地:中国洛阳润滑:油润滑外形公制尺寸:29*75*165mm外径D:75mm内径d:29mm总高度:165毫米它们在橡胶和塑料行业... | |
| 薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号:T-25105 8A项目代码:T-25105.8A原产地:中国洛阳润滑:油润滑外形尺寸:25*105*255mm外径D:105mm内径d:25mm总高度:395mm它们在橡胶和塑料... |













