Plastic extruder gearbox shaft use 7 stages thrust roller bearing M7CT2385A 23x85x227mm
The thrust cylindrical roller bearing M7CT2385Awith size 23x85x227mm
, the inner diameter:23mm, the outer diameter:85mm, the total height:227mm
|
Tandem bearing |
Basic size unit(mm) |
Basic load rating Unit (KN) |
|||
|
Inner dia |
Outer dia |
Height |
Cr |
Cor |
|
|
M7CT2385A |
23 |
85 |
227 |
860 |
4020 |
在线联系供应商
Other supplier products
 |
010.35.559 转盘轴承 431.8x695.452x90.932mm | 010.35.559 转盘轴承通常由内圈、外圈、滚动体、隔离块等四大部件构成。由于核心部件采用回转支承，因此可以同时承受轴向力、径向力。 其形式很多，但结构组成基本大同小异。 转盘轴承型号 010.35.559 外形尺寸: 431.8x695.452x90.932mm 外径: 695.452... |
 |
M5CT1242 食品饲料挤出机多级串联轴承工厂 12*42*104.6mm | 串联推力轴承 M5CT1242 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M5CT... |
 |
VLI 200644 N 四点接触球回转支承带法兰和内齿 748x546x56mm | 描述 VLI 200644 N 回转球轴承尺寸(ODXIDXH) 748x546x56mm外径(OD) 748 mm内径(ID) 546 mm宽/高/(H) 56 毫米齿轮齿d0 558MM齿轮齿 m 6齿轮齿 Z 93重量 52 公斤材料 42CrMo,42CrMo,50Mn滚动LYC球包装... |
 |
I. 1100.22.00.A slewing bearing, | Description I. 1100.22.00.A slewing bearing Outside and Inside diameter tolerances in accordance with ISO2768-m Dimension(ODXIDXH) 1095x924x82 mm O... |
 |
双螺杆挤出机用串联推力滚子轴承 M4CT3495A 34x95x145mm 库存 | 串联推力轴承M4CT3495A可以在有限的空间内承受重载荷，并在轴向方向上提供牢固的支撑，并且摩擦力低，使用寿命长。 此外，这些轴承通过油润滑移动。 此外，这些串联推力轴承主要用于橡胶和塑料行业的单螺杆和双螺杆挤出机的齿轮箱。 串联轴承主要装有标准的轴向圆柱滚子和轴承组件。 推力圆柱滚子轴承M... |
Same products
 |
Tandem roller bearing M4CT3278 with shaft 78x32x110.5mm | 卖方: JinHang Precision Bearing Co.,LTD | The tandem roller extruder bearing m4ct3278 that use for PVC screw extruder gearbox, the shaft di... |
 |
Tandem roller bearing F-86722 for Rubber extrusion machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearing f-51909 t3ar mainly used in the twin screw plastic extrusion machine gearbox.The bear... |
 |
Tandem roller bearing t6ar3278 for the extruder shaft gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing T6 AR 3278 with size 32X78X163.5mm mainly used for the high speed extruder machine ge... |
 |
Tandem roller bearing MTCT2468 for Screw extrude gearbox | 卖方: JinHang Precision Bearing Co.,LTD | The bearing M5CT2468 for food/feed/plastic/rubber extrusion machine gearbox use. With high perfor... |
 |
twin screw extruder gearbox used t5ar3278 bearing | 卖方: JinHang Precision Bearing Co.,LTD | Bearing T5AR3278 fullsize 32x78x137mm bearing actual picture, Please reference them. Bearing fact... |
