Single row cylindrical roller bearing N1880 400*500*46mm
|
Bearing code |
N1880mp5 |
|
Bearing size |
400*500*46mm |
|
Bearing outer dia |
500 mm |
|
Bearing inner dia |
400mm |
|
Bearing height |
46mm |
|
structure |
Single row Cylindrical roller bearing |
|
Lubrication |
Oil lubrication for high speed |
|
Rolling |
roller |
|
Ring material |
GCr15SiMn |
|
Roller material |
GCr15 |
|
Cage material |
Brass |
|
Precision grade |
P5 P6 Available |
|
Heat treatment |
HRC85-62 |
|
Application |
Steel wirerope ,Wire cable Tubular Strander machine |
|
Delivery time |
In stock,if exstock, the delivery time about 30 days |
|
Shipping term |
By sea or by air |
|
Package |
Strong carton or wooden case |
|
Feature |
Will use for higher speed tubular strander machine |
在线联系供应商
Other supplier products
 |
RKS.061.20.0944 转盘轴承1 046.4x872x56mm | Slewing bearing type Boundary dimension: 1 046,4x872x56mm Outer dia: Inner dia: 872 mm Height 56mm Gear teeth param... |
 |
Water Treatment Equipment use Crossed roller bearing XSU 140944 1014x874x56mm | Description XSU 140944Ncrossed roller slewing bearing Dimension(ODXIDXH) 1014x874x56mm Outer diameter(OD) 1014mm Inner diamet... |
 |
Non-standard tubular strander bearing Z-527460.ZL | Speical roller bearing 527460 have a lubrication groove and three lubrication holes in the outer ring. The robust solid brass cage is guided on the... |
 |
塑料挤出机轴承M4CT3075YB 30X75X112MM 非标准尺寸 | 串联推力轴承 M4CT3075YB 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M4... |
 |
Precision bearing Z-527456.ZL for Tubular stranding machine | The bearings Z-527456.ZL 360X440X38MM are separable and are therefore easier to mount and dismount. |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
