Thrust Ball Bearing
They can only carry axial loads and cannot carry any radial loads. The shaft rings, seat rings and ball cages are separable and interchangeable. Bearings with spherical washers could prevent misalignment during installation. The followings are the typical thrust ball bearing types.
Single direction a thrust bearing
It consists of a shaft ring, a seat ring and a ball-cage assembly, which can be mounted separately.
Double Direction Thrust Ball Bearing
It consists of a shaft ring, an upper seat ring, a lower seat ring, and two ball-cage assemblies, which can be mounted separately.
Angular Contact Thrust Ball Bearing
The bearing can be installed separately, i.e., shaft ring, seat ring, the ball-cage assembly can be mounted independently of each other.
Thrust Ball Bearing vs Radial Ball Bearing
The direction of carrying bearing loads is different. A thrust ball bearing is mainly used to bear axial load, and the direction of load is the same as the axial direction of the rotating shaft. The radial ball bearing is mainly used to bear radial load, and the direction of the load is perpendicular to the axial direction of the rotating shaft.
Among the subdivision types of thrust ball bearings, there are also thrust angular contact ball bearings that can bear radial loads, which can bear part of the radial load while mainly bearing the axial load. Among the subdivision types of radial ball bearings, there are angular contact ball bearings that can withstand a certain axial load while mainly carrying radial loads.
What is A Thrust Ball Bearing
Thrust ball bearings can withstand thrust loads that are dominated by axial loads, and they are mainly composed of a shaft washer (matched with the shaft) and a seat ring (matched with the bearing housing) with an R-shaped ring raceway, as well as steel balls and cage components.
For occasions where there is a need for aligning, a structure with an aligning seat can also be used to compensate for installation errors caused by shaft misalignment.
Thrust ball bearings can be divided into single direction thrust ball bearings, double-direction thrust ball bearings, angular contact thrust ball bearings, thrust ball bearings with spherical seat, and other forms. Single direction and double-direction thrust ball bearings can withstand one-way or two-way axial force, and angular contact thrust ball bearings can withstand not only a certain radial force but also the axial force. Thrust ball bearings with spherical seats can have a certain self-aligning function to eliminate installation errors caused by shaft misalignment.
If you want to buy high quality bearing products, please choose our website.
在线联系供应商
Other supplier products
 |
KRV 22 PP/ CF 10 VBUUR Cam Follower | Specifications of KRV 22 PP/ CF 10 VBUUR Cam Follower Designation KRV22PP CF10VBUUR （Mass）m≈g 45 Dimensions D 22 ... |
 |
HK 2012 Drawn Cup Needle Roller Bearing | Specifications of HK2012 Bearing Designations HK2012 Dimensions(mm) Fw 20 D 26 ... |
 |
Single Row Deep Groove Ball Bearing With Filling Slot | Features ofSingle Row Deep Groove Ball Bearings With Filling Slot Filling slot bearings have a higher radial load carrying capacity and limited ax... |
 |
Double Row Tapered Roller Bearing | Features of Double Row Tapered China VRoller Bearing High carrying capacity Continuous rotating Bearing radial and Bi-directio... |
 |
NKIA 5907 Combined Needle Roller Bearing | Specifications of NKIA 5907Combined Needle Roller Bearing Designations NKIA5907 Dimensions(mm) d 35 D ... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
