FORD CHB005 HYDRAULIC CLUTCH BEARING
|
Model |
SIZE(CM) |
|||
|
CHB005 |
21 |
14 |
12 |
|
OEM Numbering of Ford Hydraulic Clutch Bearing CHB005
|
Factory |
Number |
Cross Interchange Type |
Relevance |
|
BECK/ARNLEY |
0619430 |
Direct Cross Interchange |
1 |
|
DORMAN |
CS650006 |
Direct Cross Interchange |
1 |
|
FORD |
5L5Z7A508A |
Indirect Cross Interchange |
2 |
|
MAZDA |
1F2016540 |
Indirect Cross Interchange |
2 |
|
FORD |
4L5Z7A508AB |
Indirect Cross Interchange |
1 |
|
FORD |
4L5Z7563AA |
Indirect Cross Interchange |
1 |
|
FORD |
1L5Z7550AA |
Indirect Cross Interchange |
1 |
|
FORD |
1L2Z7A508AA |
Indirect Cross Interchange |
1 |
|
FORD |
1L2Z7563BB |
Indirect Cross Interchange |
1 |
|
FORD |
1L2Z7563AB |
Indirect Cross Interchange |
1 |
|
WAGNER |
SC142714 |
Indirect Cross Interchange |
1 |
|
AMS |
S0723 |
Indirect Cross Interchange |
1 |
|
AMS |
07167 |
Indirect Cross Interchange |
1 |
|
MAZDA |
ZZP016222A |
Indirect Cross Interchange |
1 |
|
MAZDA |
ZZP016222 |
Indirect Cross Interchange |
1 |
|
MAZDA |
ZZL011303 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F8016540 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F7016540 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F6216410 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F2516410B |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F2516410A |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F2516410 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F2216460 |
Indirect Cross Interchange |
1 |
|
MAZDA |
1F2016540A |
Indirect Cross Interchange |
1 |
|
FORD |
YL5Z7A508AA |
Indirect Cross Interchange |
1 |
|
FORD |
E3TZ7600C |
Indirect Cross Interchange |
1 |
|
LuK |
510005910 |
||
|
LuK |
510002610 |
Applicable Models of Ford Ford Hydraulic Clutch Bearing CHB005
How to Choose Ford Hydraulic Throwout Bearing?
The selection of grease is generally based on the speed, temperature resistance, noise requirements and starting torque of the bearing.
If the bearing cannot meet the requirements, the customer should be advised to change the model as soon as possible.
Must ask the use conditions of the bearing, which bearing speed, temperature, with tolerance are directly related to the choice of bearing clearance.
Bearing lubrication can be divided into oil lubrication and grease lubrication. Oil lubrication bearings are generally selected form bearings, grease lubrication bearings are generally selected dust cover or rubber seal seal. Dustproof cover is suitable for high temperature or the use of good environmental parts, the seals are divided into contact.
Notes for Using ford ranger throwout bearing
Clutch release bearing is a relatively important part of the car, if poor maintenance failure, not only will cause economic losses, and disassembly and installation of a considerable trouble, requiring a lot of man-hours. Therefore, it is important to find out the cause of the clutch release bearing failure, and to maintain and repair it reasonably in use to extend the life of the release bearing, improve labor productivity and achieve better economic benefits.
According to the operation regulations, avoid half-engagement and half-disengagement of the clutch, and reduce the number of times the clutch is used.
Pay attention to maintenance, regularly or during the annual inspection and maintenance, let the butter soak through with the steaming method so that it has sufficient lubricant.
Pay attention to the leveling of the clutch release lever and ensure that the spring force of the return spring meets the requirements.
Adjust the free travel so that it meets the requirements (30-40mm) and prevent the free travel from being too large or too small.
Minimize the number of engagement and disengagement to reduce the impact load.
Step lightly and easily so that it engages and separates smoothly.
If you need any kinds of clutch component, please contact us, as a professional China spare parts manufacturer, Kaigeis willing to offer you high quality products.
在线联系供应商
Other supplier products
 |
Clutch Actuator | Clutch Actuator The truck uses compressed air to disengage and recombine the dual clutch actuatorto complete the start and shift gears. A concentr... |
 |
CHEVROLET CHB001 HYDRAULIC CLUTCH BEARING | Model （KG） SIZE(cm) CHB001 21 14 10 OEM Numbering of CHEVROLET CHB001 Hydraulic Clutch Beari... |
 |
JOHN DEERE CHB014 HYDRAULIC CLUTCH BEARING | JOHN DEERE CHB014 HYDRAULIC CLUTCH BEARING Model SIZE(CM) CHB014 13 13 OEM Numbering ofJOHN DEERE... |
 |
CHEVROLET CHB002 HYDRAULIC CLUTCH BEARING | OEM Numbering of CHEVROLET CHB002 Hydraulic Clutch Bearing Factory Number Cross Interchange Type Relevance DJPARTS... |
 |
CHEVROLET CHB001 HYDRAULIC CLUTCH BEARING | Model （KG） SIZE(cm) CHB001 21 14 10 OEM Numbering of CHEVROLET CHB001 chevrolet cruze clutch... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
