ANSI Carbon Steel Globe Valve
Brief description:
- Used to cut or connect the pipe media under nominal pressure Class, working temperature -29 to 800 degrees in industries including oil, chemistry, pharmaceutical, fertilizer, and power industry. Body materials are carbon steel, alloy steel, stainless steel
Basic design standards:
- Basic design: BS 1873, ANSI B16.34
- Face to face: ANSI B16.10
- Flanges: up to 24-inch ANSI B16.5 from 26-inch MSS SP44 ANSI B16.47
- Butt-weld ends: ANSI B16.25
- Testing: API 598
- Body materials: carbon, alloy and stainless steel, WCB, LCB, WC1, WC6, WC9, C5, C12, CF3, CF3M, CF8, CF8M and MONEL
- Pressure: ANSI class 150 to 2,500 (PN1.6 to 42MPa)
- Connection: flanged and butt-welded
- Cast steel globe valves 150LB-1500LB
- Size: 2 to 36 inches (50 to 900mm)
Features:
- Outside screw & yoke
- Bolted bonnet
- Screw seat ring up to 6-inch
- Welded seat ring from 8-inch
- Available with gear operator
Special features according to customer’s requirements
在线联系供应商
Other supplier products
|
|
ANSI Carbon Steel Globe Valve | Brief description: Used to cut or connect the pipe media under nominal pressure Class, working temperature -29 to 800 degrees in industries includ... |
 |
Double Spring Type Safety Valve | Spring Loaded Safety Valve, a valve-closing body, having at least one valve-closing-body joint, in which at least one first closing-body lever is... |
 |
Double Spring Type Safety Valve | Features 1. Two or Three-piece body design2. Double block and bleed or automatic pressure release in body chamber3. Trunnion supported design red... |
 |
Double Spring Type Safety Valve | Fully Welded, blow-out proof stem, anti-fire safe design, anti-static device, free leakage of body sealed construction, low torque in operation, ... |
 |
Pneumatic Diaphragm Control Valve | The utility model discloses a Piston Pneumatic Control Valve which is characterized in that a cylinder is provided with a working air chamber and a... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
