Backflow Preventers
Basic informationThis sustainingvalveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value.Features1. Accurate Pressure Control2. Fast Opening to Maintain Line Pressure3. Slow Closing to Prevents Surges4. Completely Automatic OperationPrincipleInlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.Installation and CommissioningThe pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve Group.Product Scope, Standards & MaterialsSize Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
ZECOis one of the most professional control valve manufacturers china, and we have been devoted to produce valve chinafor many years. If you want to know more details or want a quotation, just feel free to contact us!
在线联系供应商
Other supplier products
 |
Flange Globe Valve | Description of Flange Globe Valve: ZECO forged globe valvescan be divided according to the location of the stem thread. Flange globe stop valveste... |
 |
Resilient Gate Valve for Underground | Basic informationThis underground gate valveis used as a two-way closed circuit device.Features1. No need for sluice Wells, which reduces the amoun... |
 |
Concentric Butterfly Valve | The concentric butterfly valve is characterized by the stem center, disc center and body center in the same position. Such structures are simple to... |
 |
Hydraulic Non-Slam Check Valve | Basic Information of Hydraulic Non-Slam Check Valve This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet ef... |
 |
4 Inch Butterfly Valve | Description of 4 Inch Butterfly Valve: ZECO 4 inch flanged gate valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly val... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
