4 Inch Butterfly Valve
Description of 4 Inch Butterfly Valve:
ZECO 4 flanged butterfly valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly valve is the most commonly used size on small pipelines, so there is a problem of stocking. Problems when stocking is almost the same with preparation of delivery. Time is the key factor, usually gate valve stocking period is decided by its sealing material. If the valve has to be stocked for several weeks or months, better stocking conditions are needed. Valve is usually stocked indoor and its stocking ambient temperature shall be higher than dew point. If valves are stocked outdoor, support the valve to make sure it does not contact the earth, at the same time, water-proof cover shall be added to the valve.
Features of 4 Inch Butterfly Valve:
- ZECO 4 inch butterfly valve are easily maintained. At any time pay attention to the sealing surface and shaft seal, When the sealing surface has abrasion or leakage, Generally, use the pressed seal of the screw plate to resolve, when the leakage occurred in the larger, the inner ring can be adjusted plus-one-chip be resolved, if there is damage to seals, plate seals can be removed, the replacement of seals, when the seal leakage, adjust packing gland or seal ring replacement;
- The Double offset design of ZECO 4 inch butterfly valve is less abrasion, excellent sealing capacity;
- The limit switch device of ZECO 4 inch butterfly valve ensure right position of open / close;
- The body, disc and stem of ZECO 4 inch butterfly valve have sufficient strength and flexibility, sealing can be changed inside the valve.
Material of 4 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A216 WCB + 13Cr |
|
2 |
Seal Ring |
Graphite + SS304 |
|
3 |
Retainer Flange |
ASTM A182 F304 |
|
4 |
Pin |
ASTM A276 304 |
|
5 |
Disc |
ASTM A351 CF8 |
|
6 |
Stem |
ASTM A276 304 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS304 + PTFE |
|
9 |
Bolt |
ASTM A193 B7 |
|
10 |
Nut |
ASTM A194 2H |
|
11 |
Yoke |
ASTM A216 WCB |
As a zeco valve group co ltd, ZECO always adhere to exceed customer expectations, to provide customers with more value-added.services and products as the ultimate goal.
ZECO Valve Group is established in 1991, as a industrial valve manufacturer in Shanghai, China. We have 5 valve factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly produce and supply wedge gate valves, through conduit gate valves, floating ball valves, trunnion mounted ball valves, globe valves, swing check valves, swing check valves, dual plate check valves and forged steel valves. Valve sizing 1/2" to 88", rating 150LB through 2500LB, served covering oil, gas, chemical, energy, refinery, LNG, LPG and many other fields. With the growing need, ZECO Valve factorydeveloped our own laboratory for research & development for international standard valve design innovation and vertification, which includes PT, MT, UT, FE test. ZECO Valve Group is a humble and united team, to be more diligent and progressive to show the itegrity to our clients.
在线联系供应商
Other supplier products
 |
3 Inch Butterfly Valve | Description of 3 Inch flanged Butterfly Valve: ZECO 3 butterfly valveis a small diameter butterfly valve, usually manually operated, and the connec... |
 |
Resilient Gate Valve for Underground 1025 | Basic information of Wafer Concentric Butterfly Valve with Post IndicatorThis valve can be used to open or close the medium in the fluid pipe and i... |
 |
Balancing Valve | ZECO is currently the only manufacturer in China with accurate KV data and support debugging services for balancing valve. We have our own dynamic ... |
 |
Gate Valve | Gate Valve ZECO is one of the professional gate valve manufacturing companies, specializing in the production of wedge gate valve and through cond... |
 |
Ball Check Valve | ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t... |
