12 Inch Butterfly Valve
Description of 12 Inch ButterflyValve:
Most of ZECO 12 inch butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operation speed, neither too fast nor too slow, and exert force at proper position. End position is vital important to valve performance. In Close position, ball shall be at right position to seat. The closure parts of the valve seat so close to the campaign and leave the valve seat, the valve sealing performance depends in part on the relative pieces of stem-driven closure of the valve seat to remain sealed and the resulting mechanical force. If the role of a particular incident in the direction of the closure of the closure of the pressure to close the case up from the seat, and that this power is essential. Most of the internal closure of the sliding piece in the valve seat does not rely on force stem seals, but this type of valve position to close the right thing or not is very important. In some cases, when the closure parts close to the final closed position, the driving force needed to close the case may be greatly increased, to reach the required position has been shut down parts of an auxiliary compression. Close cases are not accessible or not stopped in the customs location will have a seal leak and damage. Butterfly Valves requires right position to guarantee sealing. When the indicator shows Close position, movement shall be stopped. Now the 12 butterfly valve priceis affordable.
Features of 12 Inch Butterfly Valve:
Material of 12 Inch Butterfly Valve:
No |
Part |
Material |
1 |
Body |
ASTM A216 WCB + 13Cr |
2 |
Seal Ring |
Graphite + SS304 |
3 |
Retainer Flange |
ASTM A105 |
4 |
Pin |
ASTM A276 410 |
5 |
Disc |
ASTM A216 WCB |
6 |
Stem |
ASTM A276 410 |
7 |
Stem Packing |
Graphite |
8 |
Stem Beating |
SS304 + PTFE |
9 |
Bolt |
ASTM A193 B7 |
10 |
Nut |
ASTM A194 2H |
11 |
Yoke |
ASTM A216 WCB |
In our China valve factory, we have high quality products to customers. If you want to buy our international standard valve, please contact us.
在线联系供应商
Other supplier products
Wedge Gate Valve | Description Wedge gate valve is a linear motion, multi-turn general service valve. Table of Contents Gate valve Types as per Type of Closing E... | |
Strainer & Dirt Separator | Strainers, dirt separators and backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thr... | |
Dirt Separator | Basic informationThis valve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the cavity body;3. Dirt... | |
Manual Flow Balancing Valve | Basic information of Manual Flow Balancing Valve This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven... | |
Foot Valve | Basic information This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water so... |
Same products
阀 | 卖方: 荣腾鑫诺(天津)国际贸易有限公司 | 液压阀 | |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |