DMF-Z Right Angle Electromagnetic Pulse Valve
DMF-Z Right Angle Electromagnetic Pulse ValveProduct introduction:
The electromagnetic pulse valve is imported from abroad (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag filter dust cleaning system is controlled by the output signal of the pulse injection controller, and the filter bag is cleaned by the row (chamber). Ash, so that the dust collector's resistance is maintained within the set range, in order to ensure that the dust collector processing capacity and vacuum efficiency.
DMF-Z Right Angle Electromagnetic Pulse Valve Features:
The DMF-Z electromagnetic pulse valve is a right-angle valve. The angle between the inlet and outlet is 90°. It is suitable for the mounting connection between the helium cylinder and the dust blower tube. The gas flow is unobstructed, and it can provide the turbulent gas flow that meets the requirements.
DMF-Z Right Angle Electromagnetic Pulse Valve working principle:
The diaphragm divides the electromagnetic pulse valve into two air chambers, front and rear. When the compressed air is turned on, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the air chamber presses the diaphragm against the output of the valve. The pulse valve is in the "closed" state.
The electric signal of the pulse injection controller causes the electromagnetic pulse valve armature to move, the air chamber vent hole opens after the valve, the rear chamber quickly loses pressure, the diaphragm moves back, the compressed air is blown through the valve outlet, and the electromagnetic pulse valve is "opened" status.
Pulse injection control instrument electrical signal disappeared, electromagnetic pulse valve armature reset, after the air chamber vent hole closed, the rear chamber pressure increased so that the diaphragm close to the valve output, the electromagnetic pulse valve is in the "closed" state.
If you are looking for diaphragm valve manufacturers, Senotay can be a competitable one among those diaphragm valve suppliers. Contact us to get more information about our products!
Ou Tai is professionaldust collection system manufacturer, the main purpose of the company's products is to separate the particles and fine dust from the industrial exhaust gas, turning waste into treasure to be recycled.
在线联系供应商
Other supplier products
 |
DMC Pulse Jet Single Bag Dust Collector | Single-pulse bag filter is widely used in mining, electric furnace smelting, machinery manufacturing, chemical products, cement, building materials... |
 |
Stainless Steel Screw Conveyor | Screw conveyor stainless steelis divided into two types: horizontal screw conveyor and vertical screw conveyor. This type of screw conveyor system ... |
 |
PPS Filter Felt Bag | Hebei Ou Tai Environmental Protection Equipment Co., Ltd. isa dust collection system manufacturer. We use the advanced manufacturing equipment, ex... |
 |
Needle Felt Filter Bags | Anti-Static Polyester Needle Felt Bag Anti-static dust bag is currently ideal dust filter material, with good ventilation energy, high dust removal... |
 |
LCM Series Long Bag Offline Pulse Dust Collector | LCM series long-bag offline pulse dust remover is the result of fieldwork research technology experience of our company for more than ten years. Lo... |
