6 Inch Butterfly Valve
Description of 6 Inch Butterfly Valve:
As a valve company, ZECO provides detailed installation instructions to ensure high performance and long service life of the 6 wafer butterfly valve. The capacity if piping flanges and valve depends the deformation of gaskets. Acting force of bolting is not only resists force to loosen the connection, but also to keep necessary compressing stress. Taking note of the force does not exceed the gasket load and pressure load. In order to ensure good connection, following instructions shall be noted.
(a) Check flange surface, if any defect appears leakage, groove or impress, repair before installation;
(b) The installation requests of Cast iron flange are more than the ductile cast iron. Proposed to use low-strength steel Bolted to reduce as a result of excessive pre-compression flange of the possibility of exceeding the prescribed stress. To fit flat flange gasket in the flat flange to prevent excessive torque of bolt flange damage. Should not be confused with convex planar flange of the loaded flange In the cast iron flange connection is particularly important that the top is installed on the better to ensure that in the absence of excessive load bolted gasket circumstances make an appropriate compaction force;
(c) Gasket have the capacity of resisting deformation and damage;
(d) Check the centration of assemble-part flanges, Lubricate the threads of boltings. Boltings shall be fasten sequential to make sure level contact between flange and gasket.
Features of 6 Inch Butterfly Valve:
- group valveis fast closure;
Material of 6 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
ASTM A351 CF8M |
|
2 |
Seal Ring |
Graphite + SS316 |
|
3 |
Retainer Flange |
ASTM A182 F316 |
|
4 |
Pin |
ASTM A276 316 |
|
5 |
Disc |
ASTM A351 CF8M |
|
6 |
Stem |
ASTM A276 316 |
|
7 |
Stem Packing |
Graphite |
|
8 |
Stem Beating |
SS316 + PTFE |
|
9 |
Bolt |
ASTM A193 B8 |
|
10 |
Nut |
ASTM A194 8 |
|
11 |
Yoke |
ASTM A216 WCB |
If you want to know more about 6 inch butterfly valve price, please visit our website.
在线联系供应商
Other supplier products
 |
Pressure Reducing Valve | It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable ... |
 |
Modulating Float Valve | Features of modulating float control valve Stable and reliable work, large flow; Disc fast open and slow closed, no water hammer impact; Goo... |
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been pr... |
 |
Gate Valve | The resilient seated gate valveof ZECO is widely used and reliable in the water supply and drainage system of water supply company, sewage company,... |
 |
Gear Operated Ball Valve | Description of Gear Operated Ball Valve: Large size ball valve if adopt manual operation will reduce the efficiency of personnel, even if many peop... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
