Festures of combination air release vacuum valve
Suction at negative pressure；
Fast exhaust；
Exhaust only does not drain；
Slightexhaustand large.
Combination Air Valve Working Principle
When tube began to water injection, the disc in the open position, a large number of exhaust, when the air line up, the full of water in the valve, floating ball up and drive the check valveclosed, stop the exhaust, when water tube is normal transportation, if there is a small amount of air within the valve to a degree, water levels fall in the valve, floating ball drops, the air is being exhausted from the holes. When the pump stops, the water flow in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug is opened quickly and the air is inhaled to ensure the safety of the pipe.
Combination Air Valve Installation and Commissioning
This valve and gate groupis usually installed at the highest point of the system, such as tightening the bonnet on the valve body, theair valvestops the exhaust, normally, the bonnet should be open.Air valvecan also be used with the block valve, convenient exhaustvalvemaintenance. For specific use, please consult ZECO Valve Group.
Combination Air Valve Material and Standard
Size Range: 2"~8"Pressure
Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Exhaust Hood |
Ductile Iron |
EN 1563/DIN 1693 |
|
Float Ball |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Strainer |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seal |
EPDM / NBR |
ISO 4633 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
在线联系供应商
Other supplier products
 |
Gate Valve | The resilient seated water isolation big size gate valve / cast iron gate valve china of ZECO from China is widely used and reliable in the water s... |
 |
Metal Seated Butterfly Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... |
 |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... |
 |
Balancing Valve | ZECO is currently the only manufacturer in China with accurate KV data and support debugging services for balancing valve. We have our own dynamic ... |
 |
6 Inch Gate Valve | Description of 6 Inch Gate Valve: All casting and forged parts of ZECO 6 flanged gate valve, especially the body and cover two of the main pressure... |
