Pressure Reducing Valve
Festures of pressure reducing valves for fire protection service
Sensitive and accurate pressure control
Adjustable static pressure and dynamic pressure
Outlet pressure does not fluctuate with inlet pressure
Full port, small fluid resistance
Fire Pressure Reducing ValveWorking Principle
When water flows through the check valve, water flows into the main valve control chamber through the needle valve, and the outlet pressure is imposed on the pilot valve through the guide duct. When outlet pressure is higher than the set pressure of the pilot valve, the outlet pressure does not rise any more; when the outlet pressure of the valve reduces to the set pressure of the pilot valve, the pilot valve opens, water is discharged out of the control chamber. Because the water discharged from the pilot valve system is more than the water inflow, the pressure in main valve control chamber reduces. The inlet pressure forces the main valve open. In a stable state, the water inflow and discharged water of the control chamber are equal. The opening of the main valve keeps constant, with stable outlet pressure.
Pressure Reducing Valve Installation and Commissioning
For operation, adjustment and maintenance convenience, the pressure reducing valve is typically installed on a horizontal pipe along with a backup pressure reducing valve group. Every grade of spring of the pressure reducing valve ;can only apply in a certain range of outlet pressure, and outlet pressure can be set only by adjusting the spring of pilot valve. For specific use, please consult ZECOValve Group.
Pressure Reducing Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
As a pilot operated pressure reducing valve manufacturer, we have types of pressure reducing valve for sale, and the cost of prv valveis affordable, if you want to buy water pressure reducing valve, please contact us.
在线联系供应商
Other supplier products
Backflow Preventers | Basic informationof the big size gate valve This valve is used in the pipeline as a cut-off valve. Features Principle The big sizeresilient gate va... | |
Strainer & Dirt Separator | Strainers, dirt separatorsand backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thre... | |
Metal Seated Butterfly Valve | As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand... | |
Foot Valve | Basic information of Foot ValveThis valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the ... | |
Pressure Relief Valve | This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline ex... |
Same products
阀 | 卖方: 荣腾鑫诺(天津)国际贸易有限公司 | 液压阀 | |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |