SpO2 Monitoring Sensor
APK offers a broad portfolio of SpO2 sensors, including both reusable and disposable versions for different applications and Patient categories. The principle of pulse oximetry was developed by Nihon Kohden researcher Takuo Aoyagi in the early 1970s. Pulse oximetry measures blood oxygen saturation (SpO2) non-invasively with an infrared sensor on the fingertip. Before that, the measurement of blood oxygen saturation required arterial blood sampling. Thanks to pulse oximetry, the critical parameter of SpO2 can be measured painlessly, continuously, and in real-time.
SpO2 Probe WorkingPrinciple
The reusable SpO2 sensoris mainly composed of a connector, cable, and sensor.
Compatible connector (appearance varies according to specific products)
Cables
Patient end sensor (appearance varies according to specific products)
Intended use of SPO2 Sensor
Intended to be used on corresponding parameter monitors or pulse oximeters by healthcare professionals to collect and transfer the SpO2 and pulse rate signals of the patient.
Plug the sensor into the monitor and verify proper operation as described in the manual.
Select a proper contact position of the patient for the sensor, the preferred position is the index finger, alternative recommends the thumb or little finger.
Reference to the instructions as below, the patient finger must be inserted correctly to the end of the sensor.
The cable of the SpO2 sensor should be placed along the patient's dorsal side and parallel to the arm.
Spo2 Sensor Specification
Specifications of Spo2 Sensor
SpO2 Testing Range: not lower than 70%~100%SpO2
Accuracy Range: Tolerance of ±2% when 90%-100%; ±3% when 70%-89%;
Pulse Rate Testing Range: no lower than (30~245)bpm; Pulse Rate Testing Accuracy±3bpm;
Wavelength (this information is especially useful for healthcare professionals ) Class A: Red 660nm, IR 905nm, Class B: Red 660nm, IR 940nm.
Working Conditions of Spo2 Sensor
Ambient Temperature：5℃~45℃;
Relative Humidity: ≤10%~95%（Non-Condensing）;
Atmospheric Pressure: 50kPa~106kPa.
As one of SpO2 probe manufacturersand SpO2 probe suppliers, we have our own SpO2 sensor factory, SpO2 probe factory, and can offer different SpO2 probe typesfor sale, if you have needs, please contact us.
If you want to know more kinds of medical accessories, please visit our website.
在线联系供应商
Other supplier products
 |
Phototherapy Products | uvc therapymachine is a pupolar product of APK. 2021, APK Research and development of medical and civil skin phototherapy products, ultraviolet pho... |
 |
A5137-EC1 AAMI Compatible Direct-Connect ECG Cable 5-lead Clip, AHA 6pin | Parameter of A5137-EC1 Direct ECG Cable APK Part Number A5137-EC1 OEM Part Number 1075/P O... |
 |
Pediatric Bladder Cuff, Single Hose(Bladder 9.8x18cm, Limb cir=18~26cm) | Parameters of A-XT-02 Reusable NIBP Cuffs APK Part Number A-XT-02 Application Medical Patient Monitoring Descr... |
 |
A2520-SP03 | A2520-SP03 Datex Ohmeda Compatible Pediatric Disposable SpO2 Sensor with 50cm DB-9pin Parameters of A2520-SP03 Disposable SpO2 Sensor A... |
 |
Temperature Monitoring | APK Chinacan provide cost-effective temperature products which can deliver continuous and high precision measurement. This series of products cover... |
Same products
 |
High Precision Filter Infusion Set Sterile Disposable Clinical IV Therapy | 卖方: Hebei Zongkai Technology Co., LTD | Products DescriptionSterile Luer Lock Infusion Giving Sets IV Set Medical Intravenous Disposable ... |
 |
High Precision Filter Infusion Set Sterile Disposable Clinical IV Therapy | 卖方: Hebei Zongkai Technology Co., LTD | Products DescriptionSterile Luer Lock Infusion Giving Sets IV Set Medical Intravenous Disposable ... |
 |
Class I Sterile Test Tube PET Plastic Body Fluid Collection Clinical Use | 卖方: Hebei Zongkai Technology Co., LTD | Description of Disposable syringe: 1) Disposable syringe with three parts,luer lock or luer slip... |
 |
Class I Sterile Test Tube PET Plastic Body Fluid Collection Clinical Use | 卖方: Hebei Zongkai Technology Co., LTD | Description of Disposable syringe: 1) Disposable syringe with three parts,luer lock or luer slip... |
 |
Class I Sterile Test Tube PET Plastic Body Fluid Collection Clinical Use | 卖方: Hebei Zongkai Technology Co., LTD | Description of Disposable syringe: 1) Disposable syringe with three parts,luer lock or luer slip... |
