GDGS Power Transformers Dielectric Loss Analysis

1PowerFactor Testerapplication

GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high voltage power equipment. The non-power frequency voltage source is integrated in the tester to avoid power frequency interference. That make the tester has a good performance in measurement precision.

2PowerFactor Testertechnique index

1 Measurement error:

Capacitor value: 1%RDG+5pf

Tangent delta: 1%RDG+0.04%

2 Output voltage:AC 0.5kV~10KV

3 Testing voltage setting resolution: 0.5kv

4 Maximum output capacity: 200mA

5 Testing frequency: 45Hz/55Hz

6 Test mode: fully automatic

7 Power supply: AC220V±10 % 50Hz/60Hz

8 Environment temperature: 0~50°C

9 Humidity: ≤85%RH

10 Weight:40KG

Other supplier products

	GD-265H Automatic Viscometer ASTM D445	Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’...
	GDGS Transformer Capacitance and Tan Delta Tester	1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate...
	GD-265H Automatic Petroleum Oils Kinematic Viscometer	Introduction: » GD-265H ASTM D445 Automatic Kinematic Viscosity Apparatusis designed and made as per the industry standard of People’...
	GDGS Insulation Material Volume Resistivity Tester	I.Application GDGS automatic tan delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high volt...
	GD-0709A Mashall Stability Tester	Summary This instrument is designed and made as per industrial standardT0709-2011 in TG E20-2011 Specification and Test Methods of Bitumen and Bit...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...