Rubbing colour fastness tester
Friction color fastness test instrumentsis designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and sand paper with the specimen clamp on one side of the base.
Rotate the knob to rub the friction head with the white cotton cloth against the specimen in reciprocation motion with specified strokes. After ten times of friction between the white cloth and the specimen, assess the color transfer to the white cloth with a gray scale and the stability of dyed fabric specimen or surface coating so as to provide reference data for material assessing and selection.
Rubbing fastness testeris used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke.
Product Information and Features:
Electronic Crockmeter is used to determine colour fastness of materials to wet and dry rubbing, suitable for frequent use and long run tests
A.Diameter of friction head:16mm or 25mm;
B.The weight to produce a loading of 9N；
C.Electric drive, working voltage of 220V;
D.Equipped with electronic counter, could completely simulate the results of manual friction for 10 times, with high reproducibility;
E.The fixed device for the standard crocking cloth;
F.A steel spring clip for rapidly fastening samples;
G.Control mode consists of AATCC, ISO standards, and customized setting;
H.Automatic alarm to remind the test over.
Accessories and Consumables:
1.The Crocking Cloth Clamps;
2.Standard Emery Paper For Crockmeter;
3.Pre-cut White Crocking Cloths for AATCC/ISO;
4.Pre-cut White Crocking Cloths for SDC;
5.Crockmeter Calibration Fabric;
6.Grey Scale (Staining) ISO/BS Standards;
![friction color fastness test instruments]()
Other supplier products
|
|
High pressure testing machine series (automatic pressure boost) |
Product Introduction:
Automotive wire AC and DC high voltage testing machine for wire and cable products to test the insulation between the core a... |
|
|
Mask Fit Tester |
The mask fit tester is a key device to ensure the protective effectiveness of masks.
Working principle:
Based on aerodynamics and particle monito... |
|
|
Fabric Flame Retardant Tester |
A method is used to determine the damaged area and the length of the damage when the textiles and other materials are burned at 45 °, and the B... |
|
|
Tooth torsion yield tester |
Applicable standards:
YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dent... |
|
|
Fully automatic membrane pore size analyzer |
TRANSLATE with x
English
Arabic
Hebrew
Polish
Bulgarian
Hindi
Portuguese
Catalan
Hmong Daw
Romanian
... |
供应产品
Same products
