Sublimation Fastness Tester
Sublimation Fastness Testeris suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test, disperse dyes sublimation color fastness test, reactive dye fastness test.
resistant ironing, or sublimation color fastness tester can test the fabric in hot, dry heat treatment of the dimensional stability;
Sublimation Fastness Testercan also test the fabric sublimation color fastness. Sample is placed between the upper and lower heating plate, the upper and lower heating plate temperature is accurately controlled by a separate controller, the heating plate spacing, the weight of the test piece controllable.
Test the temperature range of 120-230 ℃, with regular alarm function, accurate control of the sample time.
Technical Parameters
A, the hot plate for test: Size W100 × D40mm aluminum material (the same from top to bottom)
B, temperature regulation: digital temperature controller, the minimum display 1 ° C (upper and lower one)
C, the timing timer, audible alarm function
D, maximum temperature: 250 ° C
E, hot plate surface pressure: 4 ± 1 KPa (40cm2)
F, Heater: Cartridge Heaters 100V 150W (upper and lower one)
G, outside size: about W250 x D300 x H230mm
Other supplier products
|
|
Syringe needle flow tester |
Product introduction
It is a device used to detect the flow of syringes. The principle is to calculate the flow
of syringes by measuring the ... |
|
|
Tabletop Light Fastness Tester |
TRANSLATE with x
English
Arabic
Hebrew
Polish
Bulgarian
Hindi
Portuguese
Catalan
Hmong Daw
Romanian
... |
|
|
oil extraction apparatus |
The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container pen... |
|
|
High - temperature Pressure Testing Device |
### Standards Compliance ISO 6722, SAEJ 1128, QC/T 730, GB/T 33549, CQC1103 - 1105 - 2015, etc. ### Main Configurations 1. Testing device: 2 - stat... |
|
|
Ceramic tile unglazed wear tester |
Applicable standards:
GB/T 3810.6-2016: This standard specifies the test method for the wear resistance of unglazed bricks, which is suitable for ... |
供应产品
Same products
