Large Flame Flammability Tester
Introduction
The Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It’s used to determine the combustion performance of outdoor products, banners and many other products.
Standards
1. NFPA 701 Standard Methods of Fire Tests for flame propagation of textiles and films
2. UL 214 Test for flame-Propagation of fabrics and films
3. CAN/ULC S109 Flame tests of flame-resistant fabrics and films
Technical Parameters
1. Stainless steel test case with strong corrosion resistance and longer useful life.
2. 25 ° angle burner with automatic timer:
a. Preset ignition time.
b. Record the afterflame time.
3. Flowmeter uses to set to the appropriate test gas flow.
4. Sample support.
5. Power: 110V 50/60Hz or 230V 50Hz.
Other supplier products
|
|
Rail transit car wire abrasion testing machine |
Applicable standards:
GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below
Main parameters:
... |
|
|
AATCC Viewing Board |
AATCC Viewing BoardStandards:American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178.Product In... |
|
|
Tooth composite resin wear tester |
Applicable standards:
YY/T 0113-2015 "Dental composite resin wear performance test method" : This standard specifies the test method of de... |
|
|
Glow Wire Tester |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
|
|
Anti-drilling Lint Tester |
Scope of application:
Applicable to the testing of the ability of lining materials, down or fibers to penetrate fabrics of bedding such as winter ... |
供应产品
Same products
