Automobile comfort air conditioning dummy test system
Applicable standards：
ISO related standards, such as ISO 14505-2, which provide test methods and evaluation indicators for thermal comfort.
Berkeley Zhang evaluation model: This model is applicable to the physiological characteristics of Chinese human body, and evaluates human thermal sensation and comfort in the non-uniform and transient environment of automobiles.
Main parameters：
Dummy size:
The design is based on the Chinese male 50th percentile human body size and characteristics to simulate the thermal comfort of the real human body.
Dummy material:
Usually lightweight and durable materials, such as fiberglass, are used to ensure that long-term use in high and low temperature and high humidity environments will not fade and rust.
Joint connection:
The dummy realizes joint connection in the neck, shoulder, elbow, wrist, waist, knee and ankle, and can realize flexible adjustment of various positions to simulate the sitting position and movement of the real human body.
Sensor configuration:
A number of sensors, such as temperature sensor, humidity sensor and heat radiation sensor, are configured on the surface of the dummy to measure the climatic environment parameters in the cabin.
Communication method:
Wireless or wired communication connections can be used between the dummy and the master controller to achieve real-time data transmission and monitoring.
Main controller functions:
Each master controller can support multiple sets of dummies to carry out the test simultaneously, improving the test efficiency.
Data can be displayed, stored and historical data queried in the form of alphanumeric, y-t charts and 3D cloud images, and exported locally in CSV format.
Range of test parameters:
Air temperature: The measurement range is usually between -20°C and +70°C, with calibration accuracy of ±1.0°C and display accuracy of ±0.1°C.
Air flow rate: The measurement range is usually between 0.1 and 5.0 m/s.
Relative humidity: The measurement range is usually between 0 and 95%RH （non-condensing）。
Radiant heat: The measurement range of the radiation sensor is near zero to >2,000 W/m².
Thermal comfort evaluation index:
The system supports a variety of thermal comfort evaluation indicators, such as PMV-PPD, EHT based on ISO 14505-2, local and global thermal sensation and thermal comfort based on Berkeley-Zhang theory, etc.
在线联系供应商
Other supplier products
 |
Synthetic Blood Penetration Tester for Medical Face Mask | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Hexapod Tumbler Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Thermal Elongation Testing Device | Introduction to Thermal Elongation Testing Device The thermal elongation testing device is used to measure the elongation and deformation of the in... |
 |
Gas Fume Chamber | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Tooth torsion yield tester | Applicable standards: YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dent... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
