Air - tightness Testing Device for Automotive Connectors
The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containers of various shapes, and can test products with air - tightness requirements in various industries (such as engine casings, oil pumps and automotive pipelines, valves, pipes, air pillows, outdoor electronic advertisements, water tanks, airbags, sealed workrooms, fire - fighting equipment, compressor pipelines, internal components of automobiles and motorcycles, battery casings, rubber hoses and connectors, etc.).
Main Functions:
1. Provide stable positive and negative pressures for testing the air - tightness of seals or connectors. 2. The positive pressure value is digitally displayed and can be automatically controlled, while the negative pressure is controlled by a negative pressure pump.
Main Parameters:
1. Pressure gauge (-0.1 - 0.5MPa), digital pressure gauge, connecting air pipe, switch, pressure regulating valve 2. Three sets of connectors, with the diameters of the connecting pipes being 3, 5, 7 (in appropriate units) or as specified 3. Test water tank: 400mm×200mm×200mm 4. Timer: Can be set within the range of 0 - 999.9S/M/H 5. Positive pressure test: It can be pressurized according to the specified pressure, or according to the set program, such as pressurization at a level of 9.8KPa 6. Negative pressure test: Negative pressure of - 49Kpa (equipped with one negative pressure source with a maximum of - 89KPa) 7. Air source for positive pressure test: One silent compressor
在线联系供应商
Other supplier products
 |
Fabric Ultraviolet Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Fabric Flame Retardant Tester | A method is used to determine the damaged area and the length of the damage when the textiles and other materials are burned at 45 °, and the B... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003 "Test method of foam polymer materials for car seats" : This standard specifies the test method of foam poly... |
 |
Impact strength tester for car seat headrest | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie... |
 |
Fogging Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
