Battery combustion tester
Battery combustion tester used for battery fire resistance, battery combustion
injection test. The battery combustion testing machine is to fix the screen at 38.1mm
above the top of the burner, the screen has 20 holes every 25.4mm, the steel wire
diameter is 0.43mm, ignite the burner, and observe the battery burning until the
battery explodes or the battery burns, and time the combustion process.
Meet the standard
UL2272-2016, UL2271-2013, GB/T31241-2014, GB/T18287-2013, GBT 8894.4-2008,
YD/T 2344.1-2011, GB/T31485-2015, etc.
Technical parameter
1. Burner: Bunsen burner, the inner diameter of the tube is 9.5mm, the length is
about 100 mm
2. Flame application time :0-999.9 s 0.1 s
3. Test round hole surface diameter :102mm
4.Test mesh screen: A mesh screen consisting of 0.43mm(0.017inch) diameter
stainless steel wire woven with 20 mesh per US inch
5. Flame distance from screen height :38mm
6. Octagonal net cover width: the distance between each side is 24 "（610mm），
octagonal, and the eight sides are movable for easy replacement and disassembly
7. Octagonal net cover height :12 "（305mm）
8. Octagonal cover material: aluminum mesh, consisting of 0.010inch（0.25mm）
diameter of aluminum wire woven into a net containing 16-18 mesh per inch
9. Protective box size: about 730x740x500mm
10. Box material: inner box stainless steel, high temperature resistance,
insulation, corrosion resistance, outer box cold rolled steel paint treatment
11. Visual observation window :150x150mm, multi-layer tempered glass and
equipped with stainless steel mesh
12. Ventilation: The rear side of the box has a fan and ventilation inside the box
13. Combustion gas: methane or LPG （customer's own）
14. Power supply :AC220V, 50Hz
15. Equipment weight: about 100kg
在线联系供应商
Other supplier products
 |
Metal wire winding testing machine | According to the criteria: GB/T 2976 "Wire winding test method for Metal Materials" ISO 4101 Cold drawn steel wire for elevator wire ropes - Tech... |
 |
Sliding bearing PV friction tester | Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV v... |
 |
Cleanliness automatic extractor | Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag... |
 |
Wire Torsion Tester | Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1504, ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
