Collection of needle rubber sleeve resilience tester
Product introduction
The collection needle rubber sleeve resilience tester evaluates the force measured by the
collection tube when it passes vertically through a die hole larger than 0.05 mm outside
diameter of the collection needle tube under test.
Meet the standard
YYT1618-2018 "Disposable Human Venous Blood Sample Collection Needle"
Technical parameter
1. Pressure test range: 0 — 50N, error is not more than ±1%, resolution 0.01N.
2. Test time: 1-999S, any choice, the error is not more than ±0.5S.
3. Test speed: 50mm/min, 80mm/min, 100mm/min error is not more than ±2%.
4. Printing method: Each time can print 8, 10 test data or 13 test data and the average
piercing force and deviation value.
5. Measuring distance: 0 — 50mm, error is not more than ±0.1mm.
Operation method
1. Insert the needle at the butt end into the die hole of the clamping fixture 2mm above
the surface.
2. Start the test device to compress the rubber sleeve.
3. Measure the rubber sleeve resilience at 5mm and 15mm between the needle tube and
the needle base.
4. The test result is 0.5N≤ the rubber sleeve resilience ≤1.5N.
在线联系供应商
Other supplier products
| Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... | |
| Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu... | |
| Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... | |
| Print friction tester | Product Introduction: Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products ... | |
| Anti-drill tester (Friction method) | I. Product Overview TheAnti-drill Tester (Friction Method)is a specialized instrument designed to evaluate the drill resistance of materials such ... |
Same products
| PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示,可同时进行水质PH、氧化还原电位、电导率、温度的测量; 带背光LCD显示清晰,功能齐全,精度高; 仪表采用微电脑测量与控制技术,具有自动校准功能,方便实用。 内置蓝牙,可以与电脑或... | |
| ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV... | |
| 防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ~19.9mS TDS Temp 0~50℃ 分辨率 ... | |
| EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用,能够准确测量水中的营养液电导率(EC)单位为mS/cm,以及总溶解固体(TDS)转换为百万分之一(ppm)。 适合需要较高EC值的植物,该测试仪具有高达6.0... | |
| PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭,有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |













