Gripping tester
Product introduction
This machine mainly aims at the ability of the product to withstand the pressure of
lead from the car when the product is packed in the warehouse or truck, train, etc., so as
to evaluate the damage of the product.
This machine adopts servo motor control, full computer operation, high-grade configuration.
Tests are customized according to ASTM D6055, U.S., SEARS, corporate standards, or
customer specified non-standard requirements.
Scope of application
Applicable to all product packaging testing and verification. The main test is that the
product packaging is subjected to horizontal pressure during transportation and storage
The deformation of the force and the protection ability of the packaging inside the
package, so as to improve the packaging design.
Technical parameter
Sample shape: parallelepiped transport package
Maximum test weight: 100kg
Clamping pressure: 400——3000Lb（adjustable） pressure can be applied on the
corresponding surface according to the handling diagram on the test sample
Clamping plate surface size: 1100x1100mm（L/W）
Test space size: 1000x1000x1000mm（length, width and height）
Clamping plate height adjustment: 0-1000mm can be set
Lifting speed: 10-500mm/mi adjustable
Clamping speed: 10-50mm/min adjustable
Splint expansion width: 200——2000mm
Transmission mode: Japan Panasonic servo motor （left and right clamps）
Base plate size: 2000x1900mm
Protection device: leakage protection limit device
Cleat requirements: Two gripper plates in the working state （2000 pounds） to ensure
smooth without deformation. The two splints are parallel to each other, and the splints are
vertical to the floor. The thickness of the splint shall not be less than 20mm
Force corrector: With force value display, used to correct the clamping pressure
Force accuracy: national standard 1.6 level
在线联系供应商
Other supplier products
 |
" Helmet Surface Friction Testing Machine" | Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi... |
 |
Face Mask Tensile Tester | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Ink Printing Sample Press / Ink Printing Trial Press | How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ... |
 |
Standard GB/T 30128-2013: Textiles – Test and Evaluation of Negative Ion Generation Application Functional Textile R&D: Assesses air-p... | |
 |
Computer-controlled Helmet Impact Tester | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
