Print friction tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Meet the standard:
GB/T 7706-2008
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N（different pressure can be customized）
Friction speed: 21, 43, 85, 106r/min adjustable
Friction area: 100（L）mm×50（B）mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230（L）mm×50（B）mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
在线联系供应商
Other supplier products
 |
Helmet Strap Tensile Tester | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cert... |
 |
Vehicle Cabin Air Filter Test device | Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ... |
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
Liquid Sustained Combustion Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L... |
 |
Automotive interior Flame Retardant Tester | The instrument is suitable for locomotive vehicle materials flame retardant material 45 ° angle of the combustion test.StandardsGB 8965-1998 Fl... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
