Automotive Interior Materials Droplet Characteristics Tester
Standards:
1. 1995L0028-EN-01.01.2007-002.001-25 ( ANNEX V) Measurement method of melting properties. 2. NF P92-505 Dripping test with electrical radiator, used for melting materials. 3. EU 95/28/EC European parliament and of the council of 24 October 1995 relating to the burning behavior of materials used in the interior construction of certain categories of motor vehicle.
Applications:
It’s used to evaluate the melt dripping and burning performance for hot melt materials under the main heat source.
Product Information:
Introduction
Automotive interior materials droplet characteristics tester determine the materials’ droplet properties according to ECE R118 Appendix 7. This mechanical and electrical control tester is suitable for measuring the melting state of automotive interior materials in the specified radiation heat radiation.
Technical Parameter
| Items | Parameters |
| Power output of radiation heat source | 500W |
| Radiating surface of radiation heat source | Transparent glass plate, Φ (100 ± 5) mm |
| Sample support: | Φ118mm stainless steel ring with φ0.70mm, 2.10mm mesh stainless steel mesh in it. |
| residue container | Inner diameter 118mm, depth 12mm |
| Sample size | 70×70(mm), The thickness is no more than 13 mm |
| Distancefrom residue container to the sample rack | 300mm |
| The range of heat flux meter | 10W/cm2 |
| working power supply | AC220V, 50Hz, ≤1000W |
| The distance from the surface of the specimen to the surface of the radiation source | 30mm |
| Dimension | (Wide) 1120mm×(Depth)520mm×(Height)1250mm, vent hole Φ 100mm |
在线联系供应商
Other supplier products
 |
Hydropro Hydrostatic Head Tester | Hydropro Hydrostatic Head Tester - Non-woven and Geomembrane - standard Standards: AATCC 127 Option 2, ISO 811, ISO 1420, GB/T4744， FZT01004, D... |
 |
Electric bicycle chassis dynamometer system | System overview: The whole electric bicycle chassis power measurement system fully meets the national standard GB17761-2024 "Safety Technical Spec... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Total Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, a... |
 |
Automatic voltage internal resistance tester | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instrument... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
