In situ multi-channel storage gas production test system
Standard
UL 1642: Standard for Lithium Batteries
IEC 62133-2: Secondary Cells and Batteries Containing Alkaline or Non-Acid Electrolytes
UN 38.3: Recommendations on the Transport of Dangerous Goods – Test Manual
ASTM G31-72: Standard Practice for Laboratory Immersion Corrosion Testing of Metals
CE Certification(Conformité Européenne)
Product Advantages
Real-Time Gas Composition Analysis
Quadrupole Mass Spectrometer: Detects H₂, CO₂, CH₄, and VOCs with 1 ppm sensitivity.
FTIR Integration: Simultaneous quantification of gas species and humidity.
High-Throughput Safety Testing
16-Channel Parallel Testing: Monitor 16 batteries simultaneously under identical/custom conditions.
Auto-Sequence Programming: 100+ preloaded test profiles (overcharge, thermal abuse, etc.).
Precision Pressure Control
0-100 bar Dynamic Range: Patented piston-cylinder design with ±0.05% FS accuracy.
Burst-Disk Safety System: Dual redundant pressure relief at 120 bar.
Thermal Stability
-40°C to 200°C Environmental Chamber: Rapid temperature cycling (10°C/min slope).
Infrared Pyrometer: Non-contact surface temperature mapping (±0.5°C accuracy).
Data Intelligence
AI Anomaly Detection: Flags abnormal gas generation patterns in real-time.
3D Visualization: Correlates pressure, temperature, and gas composition in 4D plots.
Product Features
Non-Destructive Testing (NDT): Optical pressure sensors prevent sample contamination.
Explosion-Proof Enclosure: 316L stainless steel chamber with 10 mm acrylic viewport.
Auto-Calibration: NIST-traceable gas mixtures verify sensor accuracy daily.
Modular Expansion: Add up to 64 channels via daisy-chain configuration.
Emergency Venting: Mechanical and chemical (CO₂) fire suppression system.
Technical Parameters
| Parameter | Specification |
|---|---|
| Gas Species Detected | H₂, CO₂, CH₄, C₂H₄, C₃H₆, H₂O, O₂, N₂ |
| Pressure Range | 0–100 bar (1,450 psi) absolute |
| Temperature Accuracy | ±0.5°C (-20°C to 150°C) |
| Data Acquisition Rate | 10,000 samples/second/channel |
| Power Consumption | 1,500 W (max), 200 W (idle) |
| Connectivity | Ethernet, Wi-Fi 6, 4–20 mA analog outputs |
| Dimensions | 1,200mm (W) × 900mm (D) × 1,800mm (H) |
| Weight | 450 kg (net) / 550 kg (gross) |
Accessories Included
Testing Kit:
16x pressure-rated test cells (20 mL – 2.000 mL capacity).
Pre-calibrated gas cylinders (H₂/N₂ mix, CO₂/Ar mix).
Software Suite:
License key forGasAnalyst Pro(Windows/Linux).
6-month free access to cloud-based failure prediction API.
Safety Equipment:
Explosion-proof gloves (Class 00. 3 pairs).
Gas leak detector with audible/visual alarms.
Maintenance Kit:
Spare O-rings and pressure transducers.
Cleaning solution for optical sensors.
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for UL/IEC/UN standards.
在线联系供应商
Other supplier products
| Fully Automatic Continuous Flow Reaction Calorimeter/ Fully Automated Reaction Calorimeter / Continuous Flow Reaction Calorimeter | Product Features: 1. Using the coefficient calibration method and flow - regulation calorimetry, it can quickly obtain the reaction heat release a... | |
| Paper stiffness meter | Paper stiffness meter - Other test instrument - standard Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measur... | |
| Computer-controlled Helmet Impact Tester | Introduction: In a world where safety is paramount, especially for activities ranging from motorcycling and cycling to industrial work and extreme... | |
| Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine | Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, fr... | |
| Paper water absorption tester | Paper water absorption tester - Other test instrument - standard Product Introduction: Paper water absorption tester, also known as Kleim test in... |
Same products
| Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... | |
| Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... | |
| Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... | |
| Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... | |
| Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
















