Femoral Stem Neck Prostheses Fatigue Testing Machine
Standard
- YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty.
- ISO 7206-6 (International): Defines protocols for evaluating the fatigue strength of femoral head-neck junctions.
- ASTM F2023: Additional compliance for dynamic loading of ceramic femoral heads.
- Adaptive Protocols: Customizable for emerging standards in biomaterial fatigue testing.
Product Advantages
- Electromagnetic Precision: M-Series actuator delivers ±0.1% force accuracy with sub-micron displacement control.
- 10 Million Cycle Endurance: Proven capability to complete ISO 7206-6’s 10⁷-cycle fatigue test without drift.
- R=0.1 Load Control: Advanced servo-hydraulic system maintains specified stress ratios throughout testing.
- Real-Time Failure Detection: AI-driven algorithm identifies crack initiation at sub-millisecond intervals.
- Ergonomic Workflow: 15.6” touchscreen with multilingual interface (English/Chinese/German) and pre-loaded SOPs.
- Modular Test Chambers: Quick-swap environmental pods for simulated physiological testing (-20°C to +50°C).
Product Features
- Electromagnetic Actuator: 5,340 N peak force capacity with 0.001 N resolution.
- Dual-Axis Loading: Simultaneous axial/torsional loading (50 Nm max torque).
- Dynamic Load Control: 1–30 Hz frequency range with programmable waveforms (sine, square, random).
- Thermal Chamber Integration: ±0.5°C temperature stability for accelerated aging studies.
- High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (optional upgrade).
- Safety First: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±5,340 N (11,940 N peak optional) |
| Frequency Range | 1–30 Hz (0.1 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Axial Displacement | ±10 mm (0.1 μm resolution) |
| Torque Capacity | ±50 Nm (0.01 Nm resolution) |
| Temperature Range | -20°C to +50°C (environmental chamber) |
| Data Sampling Rate | 50 kHz (synchronized across 12 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1,500W |
| Dimensions (W×D×H) | 1,200 × 800 × 1,900 mm |
| Weight | 550 kg (including thermal chamber) |
| Noise Level | <70 dB (A-weighted) |
Accessories
- Femoral Neck Test Fixture Kit:
- Self-centering collet system (12/14 mm taper compatibility)
- Laser-aligned loading anvils with wear-resistant coating
- Thermal Environmental Chamber:
- 15L capacity with rapid cooling/heating (10°C/min)
- Corrosion-resistant 316L stainless steel interior
- TestMaster Elite Software:
- Automated fatigue life prediction (S-N/ε-N curve generation)
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.5–25 Nm)
- Specimen alignment gauges (ISO 7206-6 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Temperature verification probe
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure for noise reduction
在线联系供应商
Other supplier products
 |
Mask Flame Flammability Tester | introduction: The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally conta... |
 |
Automatic Edging Folding Burling Machine | It is applicable to fabric inspection in manyindustries such as garment,shoes and hats,quilting and home textile etc. to pile up in width500-600mm ... |
 |
Helmet Xenon Aging Tester | Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by C... |
 |
Water Leak Detector/ Gas Release on Water Contact Tester/ Material Gas Emission Tester | Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases in Contact with Water, GB 19521.4-2... |
 |
Tester for Shear Force and Friction of Protrusions on Helmet Surface | Tester for Shear Force and Friction of Protrusions on Helmet Surface - Material and Parts of Automotive - standard Standards: ECE R22.06, GB811... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
