Dental Implants Static Torsion Testing Machine
Standard
- ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data reporting requirements.
- ASTM F2077-17: Complementary compliance for mechanical performance evaluation of dental prosthetic components.
Product Advantages
- Compact Ergonomics: Lightweight (35 kg) design with integrated touchscreen control panel for benchtop use.
- Ultra-Precision Torque Control: 0.001 Nm resolution ensures compliance with ISO 13498's 0.01 Nm/s loading rate requirements.
- Smart Fixturing System: Quick-change collets accommodate implant diameters (3.0–6.5 mm) and lengths (8–18 mm).
- Automated SOP Protocols: Pre-loaded ISO 13498 test sequences with real-time torque-angle curve generation.
- Biorelevant Simulation: 37±1°C environmental chamber with saline mist system for in vitro corrosion testing.
- Global Compliance: CE-marked and FDA-ready documentation package for regulatory submissions.
Product Features
- Servo-Electric Actuator: 50 Nm peak torque capacity with programmable rotation angles (0°–360°).
- Dynamic Angle Measurement: 0.001° resolution encoder tracks micro-rotational movements.
- Axial Force Simulation: Integrated 5 kN load cell for combined torsion/compression testing.
- Thermal-Mechanical Chamber: 10L capacity with rapid temperature control (20°C–50°C).
- High-Resolution Imaging: Built-in 2MP camera system for screw thread damage analysis.
- Safety Suite: Emergency stop, overload clutches, and torque limiting protection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Torque | ±50 Nm (0.001 Nm resolution) |
| Rotation Range | 0°–360° (0.001° resolution) |
| Torque Application Rate | 0.01–0.10 Nm/s (ISO 13498 compliant) |
| Axial Force Capacity | ±5,000 N (5 N resolution) |
| Temperature Control | 20°C–50°C (PT1000 sensors) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 800W |
| Dimensions (W×D×H) | 450 × 400 × 600 mm |
| Weight | 35 kg (net) / 45 kg (with chamber) |
| Noise Level | <50 dB (A-weighted) |
Standard Accessories
- Dental Implant Fixture Kit:
- Self-centering collets (3.0–6.5 mm implant compatibility)
- Thread engagement gauges (ISO 13498 compliant)
- Thermal-Mechanical Chamber:
- 10L capacity with rapid heating (10°C/min)
- Corrosion-resistant titanium interior
- TorsionMaster Pro Software:
- Automated torque-angle curve generation and failure analysis
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.1–10 Nm)
- Implant alignment jigs (ASTM F2077 compliant)
- Calibration Bundle:
- NIST-traceable torque calibration weights
- Angular encoder verification tool
- Safety Kit:
- Torque limiting clutches
- Acoustic enclosure with 25 dB noise reduction
在线联系供应商
Other supplier products
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
Anatomy Cloth Burling Machine | lt is suitable for planing and winding of circular wovenfabric and cylindrical fabric. Basic characteristics： Fabric inspecting width:2000mm Max... |
 |
Shoe heat insulation testing machine -- sand bath | Shoe heat insulation testing machine -- sand bath - Other test instrument - standard Product Information: Main uses: Evaluate the insulation per... |
 |
电池冲击测试仪 | 产品介绍 将测试样品电池放置在平坦表面上，一根直径为 15.8±0.2 毫米（5/8 英寸）的杆以十字形放置在样品中心上方。将 9.1 公斤或 10 公斤的重物从一定高度（610 毫米或 1000 毫米）落到样品圆柱上。 电池进行冲击试验时，其垂直轴应平行于平面，并与钢柱的垂... |
 |
Safety shoe impact testing machine | Safety shoe impact testing machine - Other test instrument - standard Product Introduction: According to standards BS-953,1870,EN-344,ANSI-Z41,CS... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
