Protective Clothing Resistance Tester
Scope of Application:
This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying with different testing standards such as national standards and European standards.
It is equipped with the TEST V1.6 dedicated testing software, which can realize online operation, automatically complete the sample test according to the standard regulations, process the test results, edit and print the test reports.
Related Standards:
GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity
GB/T 22043 - 2008 Clothing - Anti-static Performance - Test Method for Resistance Through the Material (Vertical Resistance)
GB 12014 - 2009 Anti-static Clothing
GB/T 12703.4 - 2010 Textiles - Evaluation of Electrostatic Properties - Part 4: Resistivity
EN 1149 - 1 - 2006 Protective Clothing - Electrostatic Properties - Part 1: Surface Resistivity Test Method and Requirements
EN 1149 - 2 - 1997 Protective Clothing - Electrostatic Properties - Part 2: Resistance Through the Material - Vertical Resistance Test Method
AATCC 76 Fabric Surface Resistivity
ANSI / ESD STM2.1 Anti-static Clothing Resistance Test Method - American Standard
Technical Parameters:
- Resistance measurement range: 104Ω ～ 1016Ω.
- LCD display: Surface resistance, temperature, current, voltage, test time, and test sample data can be input; units can be switched (mm, cm, m).
- Built-in test voltage: Any value from 0 - 1000V can be set.
- Basic accuracy: < 1G ± 1%; >= 1G ± 3%; >= 1T ± 10%. The accuracy deviation values in different ranges are different.
- Operating environment: Temperature: 0℃ ～ 40℃, relative humidity < 80%.
- Internal test voltage: Any value from 10/50/100/250/500/1000V can be set.
- Power supply: AC 220V, 50HZ, power consumption is about 5W.
- Measurement mode: Manual/automatic range. With PC testing software (optional), USB communication interface, and the software interface synchronously displays, analyzes, saves and prints data!
- Common electrode (fixture) device options:
Type A: Heavy hammer electrode (for point-to-point resistance test of fabric surface)
Type B: Ring combination electrode (for fabric surface resistivity test and fabric vertical resistance test) -
Dimensions of the main unit: 330mm * 340mm * 120mm
Instrument Configuration:
- Standard configuration of the instrument:
(1) 1 set of computer operating system software
(2) 1 main unit of the tester
(3) 1 set of standard point-to-point heavy hammer electrodes for the instrument
(4) 1 set of standard ring combination electrodes for the instrument
(5) 2 measurement cables; 1 power cord.
(6) 1 user manual;
(7) 1 certificate of conformity;
(8) 1 packing list. - Optional configuration for users:
(1) 1 portable laptop computer. (The software can be in English or Chinese) - Explanation of relevant testing accessories:
Type A: Heavy hammer electrode GB 12014 - 2009 "Anti-static Clothing"
Type B: Ring combination electrode Corresponding standards: European standards EN 1149 - 1, EN 1149 - 2; GB/T 12703.4 - 2010; national standards GB/T 22042 - 2008, GB/T 22043 - 2008
在线联系供应商
Other supplier products
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ... |
 |
Spring tension testing machine | Product Introduction: The spring tension and compression testing machine has accurate loading speed and force measurement range, and has high prec... |
 |
Medical Mask Differential Pressure Tester YY 0469-2011 YY/T0969-2013 | Standards: YY 0469-2011 YY/T0969-2013 EN 14683:2014 Annex C ASTM F2100 Product Information: Medical Mask Differential Pressure Tester also calle... |
 |
Large diameter blasting test machine/ Large Diameter Pipeline Burst Tester / High Pressure Pipe Burst Testing Equipment | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurab... |
 |
Horizontal Vertical Combustion Tester | Standards: UL94 Test for flammability of plastic materials for parts in devices and appliances ISO 1210 Plastics -- Determination of the burning... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
