Filter Dynamic Cycling Tester
Filter element dynamic cycling test bench is mainly used to test the chemical element precipitation characteristics of filter element under long-term dynamic cycling.
It adopts touch screen operation mode, combined with PLC control, according to the settingline, and can analyze and judge the abnormal state in the test process and send out alarm information. Manual interval sampling and analysis.
The test bench consists of four parts: test cycle system, real-time temperature control system, electrical control system and test bench frame.
1. Test circulation system
The test circulation system adopts variable frequency pumping unit, which runs automatically by setting the flow rate. System configuration: a test tank, a set of temperature control system, two sets of independent heaters; a set of bypass net
pressure regulator; a set of agitators.
2. Real-time temperature control system
test bench design heating device to ensure that the temperature requirements of the test system, temperature control range of 80 ± 2 ℃ range.
3. Electrical control system
Electrical control system mainly consists of hardware, software, two major systems, the system hardware are selected from well-known brands in the industry, applicable to a wide range of working conditions, reliable operation. The control mode adopts
PLC control, with good human-computer interaction interface, simple operation, stable operation and many other advantages.
4. Test bench frame
The test bench frame design adopts high-strength industrial aluminum frame structure, which has many advantages such as light weight, high strength and beautiful appearance.
Technical indicators:
1. Test medium: water containing boron, and containing lithium hydroxide
2. Test flow: 2-10 m³/h working point 5.7
3. Rated pressure: 0.8 MPa
4. Test cartridge differential pressure: 0. 4MPa
5. Maximum working temperature: 80 ℃
6. Test tank volume: 2000L
7. Maximum cartridge size: 2.5 inches × 60cm (diameter × height cm) to provide a set of equipment
8. Test bench power: 22kw
9. Test bench power supply: three-phase five-wire AC380V / 50Hz
在线联系供应商
Other supplier products
 |
Mask Tensile Testing Machine | Standards: ISO13934-1,13934-2,13935-1,13935-2,13936-1,13936-2,13936-3,13937-2,13937-3,13937-4,1421, 2411, 2062, 4674-1,5082, 9073.3, 9073.4, 907... |
 |
Catheter Residual Vacuum Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Residual Vacuum Tester The catheter residual vacuum ... |
 |
Paper quantitative tester | Paper dust meter - Other test instrument - standard Product Introduction: The circular square quantitative sampler （referred to as quantitative s... |
 |
Rubber low temperature brittleness testing machine | Product Introduction: Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample ... |
 |
10kN Universal Testing Machine ISO 13934-1 ASTM D5587 | The electronic universal testing machine is a classic and practical model developed by our company, and it is also the mainstream model currently p... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
