Microbial Barrier Tester
Product Introduction:
Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the contact wound materials claimed to have bacteria-inhibiting performance. The bacteria-inhibiting test device can simultaneously meet the four test methods of wet bacteria-inhibiting, dry bacteria-inhibiting, semi-wet （dry outside and wet inside） bacteria-inhibiting, and semi-wet （wet outside and dry inside） bacteria-inhibiting.
Meet the standard:
EN 15194 ISO 4210
UL 2849 ECE R50
Equipment principle:
The sample was placed between two collets of a hemispherical glassware, a certain amount of standard bacterial solution was added to one side of the ware, and liquid medium was added to the other side, and the turbidity in the liquid medium was checked after a certain period of time
Or scrape the liquid to check for bacterial growth.
Product Advantages:
Ensures compliance with critical safety and performance standards for e-bike lighting.
Provides accurate and repeatable measurements of photometric and electrical parameters.
Allows for comprehensive evaluation of light distribution and beam patterns.
Facilitates durability testing under simulated environmental and mechanical stresses.
Supports efficient research and development of innovative and reliable lighting solutions.
Contributes to enhanced rider safety and visibility in various conditions.
Helps in meeting regulatory requirements for market access and product certification.
Product Features:
Goniophotometer: A precise instrument for measuring light intensity distribution in 3D space, essential for analyzing beam patterns and obtaining luminous intensity data.
Integrating Sphere: Used for measuring total luminous flux (lumens) and other integral photometric quantities, often with a spectroradiometer for color properties.
Photometers/Lux Meters: High-accuracy instruments for measuring illuminance at specific points or areas.
Programmable DC Power Supply: To provide stable and controllable power to the e-bike lighting device, simulating various battery conditions.
Electrical Measurement Unit: For measuring voltage, current, power consumption, and electrical efficiency of the lighting device.
Environmental Test Chambers: Chambers for simulating conditions such as extreme temperature, humidity, thermal shock, and salt spray.
Dust and Water Ingress Test Chambers: To evaluate the lighting device's IP (Ingress Protection) rating (e.g., IP6X, IPX7).
Vibration and Shock Test Systems: To assess the mechanical robustness and durability of the lighting device under typical e-bike operating conditions.
Control Software and Data Acquisition: Comprehensive software for automating test procedures, collecting data, analyzing results, and generating reports.
Fixture and Mounting: Adjustable fixtures to securely mount various types and sizes of e-bike lighting devices for testing.
Product configuration:
Two hemispherical glass devices, two glass plugs, two gooseneck glass tubes.
在线联系供应商
Other supplier products
 |
Shoe Peeling Strength Tester | Main uses: The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By si... |
 |
Catheter Balloon Inflation Diameter Tester | Catheter Balloon Inflation Diameter Tester - Other test instrument - standard Product Information: Main Uses of the Catheter Cuff Inflated Diamet... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Taber abrasion resistance tester | Standards: Applicable Standards ISO 9352, ISO 5470, ISO 7784, ASTM D1044, ASTM D3884, ASTM D4060, GB/T 5137.1, QB/T 2726, DIN 53109 Applica... |
 |
Floor Material Burning Performance Tester | Standards: ASTM E648-15 Standard test method for critical radiant flux of floor-covering systems using radiant heat energy source BS EN ISO Rea... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
