Contact heat resistance tester
A Contact Heat Resistance Tester is a specialized laboratory instrument designed to measure a material's ability to resist and protect against heat transfer through direct contact.
This tester works by applying a heated surface at a controlled temperature and pressure to a material specimen. It then measures the amount of time it takes for the temperature on the material's opposite (unexposed) side to reach a specified threshold, or the temperature increase after a set duration. This provides critical data for evaluating the thermal protective performance of materials used in gloves, protective clothing, and other applications where direct contact with hot objects or surfaces is a risk. It's essential for ensuring safety and compliance with relevant industry standards.
Compliance Standards:
EN 702, EN 12477, EN 407, ISO 12127
Scope of Application:
Suitable for testing thermal protection performance of firefighter suits, heat-resistant gloves, and related materials.
Product Details:
The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for specimen temperature to rise 10°C under specified pressure and heating conditions. This critical time determination provides quantitative assessment for thermal protection material development and performance evaluation.
Technical Specifications:
1. High-temperature heating element (Φ25.2mm) with:
a. Sensitive thermocouple sensor
b. Temperature settable from room temperature to 500°C
2. Insulated heating element coating to prevent heat dissipation interference
3. 49N contact force provided by weighted pressure plate
4. Alumina-anodized temperature probe (Φ25mm, 5mm) with ±0.1°C accuracy
5. Motorized sample holder system:
a. 5mm/s precise motion control
b. Contact heating body at controlled speed
6. One-touch testing with LED display showing:
a. Initial specimen temperature
b. Real-time temperature
c. Critical 10°C rise time (±0.1s resolution)
7. Dimensions: 800×50×550mm (W×D×H)
8. Power requirement: 230V 50Hz AC
在线联系供应商
Other supplier products
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p... |
 |
SCHAP Fogging Tester for Automotive & Textile Materials | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics — ... |
 |
Shoes Heat Insulation Tester | Applications: This shoe heat insulation tester is used to determine the heat insulation performance for the whole shoe. Place the specimen (a wh... |
 |
Battery diaphragm permeability tester | Meet the standard: GB/T458, ISO536/2, QB/T1667, GB/T23227, ISO2965, YC/T172, GB/T12655, S05636/3, IS05636/5, GB/T20042.7-2014, GB/T36363-2018, ... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
