Goggles Puncture Resistance Testing Machine/ eyewear penetration test equipment/ Goggle penetration tester
Introduction：
In environments where eye protection is critical, goggles are a frontline defense against hazards. But how do you ensure that these vital pieces of personal protective equipment (PPE) can truly withstand the impact of sharp objects? The answer lies in rigorous testing, and that's where the Goggles Puncture Resistance Testing Machine becomes indispensable.
This specialized instrument is engineered to precisely measure the resistance of protective goggles and their component materials to puncture from various sharp projectiles. It's a crucial tool for manufacturers, quality control departments, and safety compliance bodies dedicated to producing and verifying eye protection that meets the highest safety standards.
Applicable standards:
GB 811-2010
Key Advantages for Manufacturers and Safety Professionals
-
Objective Measurement: Provides quantifiable data on puncture resistance, moving beyond subjective assessments.
-
Enhanced Safety Compliance: Helps ensure products meet the strict requirements of relevant safety standards for eye protection.
-
Improved Product Quality: Allows for verification of material integrity and manufacturing consistency.
-
Versatile Testing: Can be used to test various types of goggles, face shields, and the materials used in their construction.
-
Reliable Performance Data: Generates data essential for product development, quality assurance, and marketing claims related to safety features.
Purpose
It is to make a certain weight of sharp objects fall from the height specified in the standard and act on the surface of helmet or goggles, so as to determine the ability of helmet or goggles to resist penetration by sharp objects.
Technical parameters
1. impact height 1000mm ~ 3000mm
2. impact hammer 3kg, impact hammer cone tip angle of 60 degrees
3. the head fixed frame has an adjustable device to facilitate rapid and convenient installation of helmets
4、The conduit adopts high-strength aluminum tube anodic treatment, beautiful appearance.
5、Hammer lifting method adopts manual lifting
6、Impact hammer adopts electromagnet release device.
7、Total height of the instrument is about 5m
8、Voltage 220V
在线联系供应商
Other supplier products
 |
scratch resistant instrument | Standards: GB/T 2918,GB/T 6151,GB/T 8424.3,PV3952,BMW GS97034-2,BMW GS97034-9,GMN 3943-2003,FLTM BN 108-13,STD1024-3113,GMW 14698-A,GMW 14688 ... |
 |
Multi-function Burling Machine | Basic characteristics： Fabric inspecting width: 1800/2000/2400mm Maximum batching diameter: 500mm Power supply voltage:AC220V±50Hz Rolli... |
 |
Metal Bone Screws Torque Tester | Standard YY/T 1506, ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
 |
Circular Locus Pilling Tester | The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product ... |
 |
Leather Vamp Flexing Extensibility Testing Machine | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
