Foam Indentation Fatigue Testing Machine

Purpose:

This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the national standard, and the compressive hardness of sponge, foam and other materials can be accurately measured. In addition, it can also be used to measure the specified compression hardness of the seat foam (such as backrest, seat cushion foam, etc.)， and accurately measure the compression hardness of each foam part of the seat.

How it Works:

The sponge foam compression stress test puts the sample between the upper and lower pressure disks, and when the upper pressure disks compress the sample of A certain size down to the concave degree specified by the A method (B method, C method) required by the national standard at the specified speed, the load element on the load cell will feedback the induced pressure to the controller for processing and display, so as to measure the collapsibility hardness of the sponge, foam and other samples.

Functional characteristics：

1. Automatic zero clearing: After receiving the test start instruction, the system automatically clears zero.

2. automatic return: after the sample is broken, it will automatically return to the initial position.

3. change the speed: The machine can change the test speed arbitrarily according to different samples.

4. indicating value verification: the system can achieve the accurate calibration of force value.

5. control method: According to the test needs can choose the test force, test speed, displacement and other test methods.

Standards:

ISO 2439: Flexible cellular polymeric materials — Determination of hardness (indentation technique)

ISO 3386-1: Polymeric materials, cellular flexible — Determination of stress-strain characteristic in compression

ASTM D3574:Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams

DIN 53576

JIS K6400-6

Technical parameter：

1. control mode: touch screen control;

2. induction mode: precision load element;

3. capacity: 200kg;

4. unit switch: Kg, N, LB;

5. pressure plate: diameter 200mm, bottom rounded R1mm;

6. lower platform: 420×420mm, porosity diameter 6mm, spacing 20mm;

7. the maximum stroke: 75mm;

8. test speed: 100±20mm/min;

9. power source: servo motor;

10. transmission mode: precision ball screw;

11. power source: single-phase, 220V, 50Hz/60Hz, 2.5A;

12. Weight: 160kg.

Other supplier products

	Battery Nail Penetration Fire Tester	The nail bed combustion instrument is a professional instrument used to test the combustion performance of various materials. It is mainly used for...
	Helmet Xenon Aging Tester	Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by C...
	Coating abrasion resistance tester	Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met...
	Protective Clothing Liquid Static Pressure Tester	Instrument use: The acid-proof clothing material anti-seepage acid static acid pressure tester is used to measure the acid-base anti-seepage of br...
	Luggage lifting and unloading testing machine	Introducing the Luggage Simulation Lifting and Unloading Tester by Qinsun, a cutting-edge measuring instrument designed to evaluate the durability ...

供应产品

Same products

	PH-2398 pH/EC/ORP/温度 多参数测试仪	卖方: 科立龙电子股份有限公司	大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或...
	ORP-2026S 防水型 土壤ORP&温度 二合一测试仪	卖方: 科立龙电子股份有限公司	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	防水型 EC /TDS/温度三合一参数测试仪	卖方: 科立龙电子股份有限公司	范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ...
	EC-98330 电导率营养测试棒	卖方: 科立龙电子股份有限公司	本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0...
	PH-808防水笔式土壤PH计	卖方: 科立龙电子股份有限公司	两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保...