MST clothing pressure tester-QINSUN
Product Introduction
The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or
in the laboratory to easily measure the pressure of elastic bandages and clothing in
medicine, sports, fashion and other fields.
Starting with the MST Mark V version, software updates are available for additional
features. MST Mark III and later, MPT-4. and MPT-7 can also be connected without a
software update.
Compliant standards
ENV 12718.CEN/TR 15831.RAL-GZ 387/1.RAL-GZ 387/2.FZ/T 73031.YY/T 0851.YY/T 0853
Scope of application
1. Foot, knee, elbow bandages, etc.;
2. Scarves, sleeves, tubes, tights, leggings, sweatpants, belly belts, back supports;
3. Functional underwear, sports bra, compression shirt, cycling shorts, shapewear;
4. Full body sportswear, space suit, hospital protective suit, rescue suit, military
uniform, military uniform, etc.
The MPT-4 has four multipoint probes and can also be directly connected to all older
MST Mark X versions.
The MPT-7 has seven multipoint probes and is recommended for use with MST Mark
V devices. The MPT-7 can only operate to a limited degree on the older MST Mark X
versions because they only have six measuring points.
Main parameter
Multi-point probe:
1. Diameter :50 mm;
2. Tube length :1000 mm;
3. Maximum pressure :80 mm Hg or 10.6 kpa;
4. Measuring range :55-70 mm Hg or 0.7-9.3 kpa;
5. Features: waterproof, washable, sterilizable.
Electrical connection data:
1. Input voltage range :100-240VAC;
2. Input frequency :50-60 Hz;
3. Power consumption :35 watts.
在线联系供应商
Other supplier products
 |
Textile formaldehyde content tester | Introduction In China, the national mandatory standard "national textile products basic safety technical specifications" GB18401-2003. with effe... |
 |
Ross Flex Tester | Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di... |
 |
Impact strength tester for car seat launching headrest | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collis... |
 |
Water Vapour Permeability Tester | Information The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requ... |
 |
Geosynthetic creep tester | Scope of application: DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products. ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
