Fabric Friction Charge Tester-QINSUN
Fabric frictional voltage electrostatic tester machineis the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.The Fabric Friction Charging Tester is composed of a friction device and a potential measuring device, which is used to test the electrostatic characteristics of the fabric after the charge is charged under laboratory conditions.
Features
1. The measuring device is composed of a friction device and a potential measuring device;
2. the potential measurement device consists of Faraday tube and electrostatic potentiometer components;
3. placed position: Faraday tube: ground, electrostatic potentiometer: experimental bench (or desktop).
Fabric friction
GB12059
GB12014
GB/T01060
JIS L1094
GB/T12703.3
Parameters
1. The measurement range: 0 ~ 2uC
2. Precision: 0.001uC
3. The input impedance:> 10Ω
4. Roller friction machine: diameter ≥ 590mm; depth ≥ 360mm
5. Static tube: diameter: 500mm; depth: 1350mm
6. Dimensions: 1200 × 600 × 1400mm
7. Power: AC220V 50HZ 1.5KW
8. Weight: 65Kg
Friction charged charge tester Steps:
1. connecting the Faraday tube and the amount of charge measurement device: the end of a dedicated cable connected with the input of the charge meter connected to the other end of the Faraday tube with the outer cylinder of the socket connection.
2. turn on the charge amount of the tester power - the power switch up to the "1" position.
3. press the "clear" button, so that the charge meter shows the number is zero.
4. with a roller friction machine friction test, immediately after the end of the friction with the insulation rods into the Faraday tube tube inside the tube. In this process the specimen and other objects should be kept above 300mm.
5. Read the reading on the charge quantity measuring device.
在线联系供应商
Other supplier products
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ... |
 |
DSC Differential Scanning Calorimeter | The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl... |
 |
Xenon Arc Weather Ometer SI4000 | Introduction SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for te... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
