Spray Aerosol Ignition Distance Tester

Product Description

Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance Test for Spray Aerosols and GB/T 21630-2008 Test Method for Ignition Distance for Dangerous Goods Spray Aerosols.

Standards

GB/T 21630-2008

GAT536

NY/T 1860

Product Features

1. It adopts an embedded processor and the Windows CE operating system.

2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.

3. It integrates two working modes: the "standard mode" and the "custom mode".

4. The aerosol sprays automatically, and the aerosol can clamping device can automatically make the can stand upright or turn it upside - down.

5. The nanosecond - level photosensitive sensor detection module automatically detects whether the spray is burning.

6. Driven by a hybrid stepping motor and equipped with an optical encoder, it enables precise positioning of the measurement position.

7. It uses a spark lighter as the ignition source, producing a blue - colored non - glowing flame with a height of 4 - 5 cm, and the flame height is adjustable.

8. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

9. The dedicated fire - proof accordion cover can effectively prevent equipment contamination.

10. It is equipped with a temperature and humidity module to monitor the temperature and humidity of the test environment in real - time.

Technical parameters

Operating Environment	(5~40)℃, <85%RH
Ambient Temperature Measurement Range	(-10~+60)℃
Ambient Temperature Measurement Accuracy	±0.5℃
Ambient Humidity Measurement Range	(5~95)%RH
Ambient Humidity Measurement Accuracy	±5.0%RH
Flame Detection Response Time	≤6ms
Flame Detection Distance	(15~90)cm
Positioning Accuracy	±1mm
Minimum Pressing Duration	5s
Ignition Method	Gas Igniter
Aerosol Tank Positioning	Aerosol canisters can be turned over automatically
Compatible Spray Tank Dimensions	Height (120~400)mm, Diameter (30~80)mm

Other supplier products

	Fusion Cages Shear Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, an...
	Automatic Reaction Calorimeter	Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati...
	Fabric Wrinkle Bending Tester	Overview The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. ...
	Safety Helmet Impact Acceleration Tester	The safety helmet impact acceleration tester is an instrument used to test the performance of safety helmets when subjected to impact. It can simul...
	Plastic ball indentation hardness meter	Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...