Flip Phone Durability Tester
The Flip Phone Durability Tester is a specialized testing machine designed to evaluate the fatigue life and mechanical reliability of clamshell and foldable mobile s. By simulating repeated opening and closing actions under controlled conditions, it provides precise and repeatable measurements of hinge durability, wear, and failure points. Compact and adaptable, this tester is suitable for integration into environmental chambers or limited lab spaces.
Application
(1) Fatigue life testing of clamshell and foldable smarts
(2) Mechanical reliability assessment of mobile hinges and flip mechanisms
(3) Quality control and production verification for mobile manufacturers
(4) Research and development of new hinge designs and materials
(5) Testing of models under accelerated use conditions
(6) Integration into environmental test chambers for combined temperature/humidity and mechanical testing
Standards
(1) GB/T 2423.2-2008 — Environmental testing for electrical and electronic products: Low-temperature test
(2) IEC 60068-2-1 — Environmental testing: Cold
(3) IEC 60068-2-2 — Environmental testing: Dry heat
(4) JEDEC JESD22-B111A — Mechanical shock and hinge testing for electronic devices
(5) ASTM F1977 — Standard test method for fatigue of electronic hinges
(6) ISO 9001 — Quality management requirements for testing processes
Features
(1) Compact and unique design suitable for limited laboratory spaces or environmental chambers
(2) Multi-station configuration (4 stations) for simultaneous testing of multiple devices
(3) High-precision stepper motor and Siemens PLC control for stable and repeatable operation
(4) Automatic swing arm angle adjustment from 0° to 180°
(5) Sensor-based direct detection of flip counts for accurate fatigue measurement
(6) Low-noise and maintenance-free operation
(7) User-friendly touch screen interface for easy parameter setup and monitoring
(8) Anti-static fixtures to protect devices during testing
Parameters
| Item | Description |
|---|---|
| Number of stations | 4 |
| Operation mode | Touch screen |
| Control element | Siemens PLC |
| Action execution | Stepper motor |
| Swing arm angle range | 0–180° (automatic adjustment) |
| Clamshell beat frequency | 50–30 times/min (automatic adjustment) |
| Counter | 6-digit built-in |
| Fixture type | Anti-static fixture |
| Power supply | AC 220V/50Hz |
Accessories
(1) Anti-static device fixtures
(2) Sample mounting brackets for various sizes
(3) Calibration tools for stepper motor and PLC system
(4) Optional environmental chamber interface
Test Procedures
(1) Secure the mobile in the anti-static fixture on the designated station
(2) Set the desired swing arm angle and flip frequency via the touch screen
(3) Start the test using the PLC control interface
(4) Monitor the flip count via the built-in counter
(5) Observe the device for any mechanical failure or degradation
(6) Automatically stop the test once the preset flip count is reached or device failure occurs
(7) Record results and, if necessary, repeat for additional devices or test parameters
Maintenance Information
(1) Regularly clean fixtures and swing arms to prevent dust accumulation
(2) Inspect and calibrate the stepper motor and PLC control system periodically
(3) Verify sensor accuracy and counter functionality before testing
(4) Lubricate moving mechanical parts as recommended by the manufacturer
(5) Store the tester in a dry, stable environment to maintain electrical and mechanical reliability
在线联系供应商
Other supplier products
 |
Adiabatic Self - Accelerating Decomposition Temperature Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact... |
 |
Standard Helmet Visual Field Tester | The Standard Helmet Visual Field Tester is a precision instrument designed to evaluate the peripheral vision and visor obstruction of safety helmet... |
 |
Textile Fiber Composition Analyzer | Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2... |
 |
3KW 150l Xenon Lamp Aging Test Chamber Air Cooled | Detailed Product Description standard: Xenon Weathering Test Chamber Xenon Lamp: 3KW Inner Dimension: 800x800x800 Humid. Range: 65%&m... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
