Diaper Anti-Side Leakage Performance Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side leakage performance of diapers. It is widely used in the research and development, quality control, and performance testing of baby diapers, adult diapers, sanitary napkins, and other absorbent hygiene products. This instrument provides reliable, quantitative data to guide material design, production optimization, and product performance improvements.
Application
(1) Baby diapers, training pants, and pull-up diapers
(2) Adult incontinence diapers and absorbent briefs
(3) Sanitary napkins, panty liners, and menstrual products
(4) Absorbent underpads, bed pads, and protective sheets
(5) Nonwoven materials, superabsorbent polymers (SAP), and top sheet materials
(6) Liquid barrier and acquisition layers in diaper prototypes
(7) Laboratory testing of raw materials and finished products
(8) Production line quality control and pre-shipment inspection
Standards
The instrument is designed to meet multiple national and international standards, including:
(1) GB/T 28004.1-2021 — Diapers Part 1: Baby Diapers
(2) GB/T 28004.2-2021 — Disposable Diapers Part 2: Adult Diapers
(3) EDANA 152.0-99 — Absorbency Test Method for Nonwoven Materials
(4) ISO 9073-11 — Textiles — Test Method for Liquid Loss in Nonwovens
(5) ASTM F1911 — Standard Test Method for Absorbency of Disposable Hygiene Products
(6) JIS L 1096 — Testing Methods for Disposable Absorbent Products
Features
(1) Measures key liquid retention and leakage properties for accurate performance evaluation.
(2) Adjustable pressure and timing controls to simulate real usage conditions.
(3) Suitable for various product types, including baby and adult diapers, sanitary napkins, and absorbent pads.
(4) High-precision measurement ensures repeatable and reliable results.
(5) User-friendly interface for easy operation and monitoring.
Parameters
| Parameter | Specification |
|---|---|
| Test range | 0–500 ml (depending on instrument model) |
| Measurement accuracy | ±0.5 ml |
| Sample diameter | 40 mm |
| Test area | 20 cm² |
| Pressure range | 0–200 kPa (or higher) |
| Time control | 0–999 s |
| Power supply | AC 220V, 50/60 Hz |
| Overall dimensions | Dependent on model |
| Weight | Dependent on model |
Accessories
(1) Main unit ×1
(2) Sample holders ×2
(3) Instruction manual ×1
(4) Power cable ×1
(5) Calibration weights or pads (if applicable)
Test Procedures
(1) Prepare the sample and place it in the designated holder.
(2) Adjust the test pressure and set the required test time.
(3) Pour the standard test liquid onto the sample.
(4) Start the test and allow the instrument to measure liquid loss and side leakage.
(5) After the test, record the measurement data.
(6) Clean the sample holder and instrument surface before the next test.
Maintenance Information
(1) Regularly clean the sample holder, test platform, and liquid channels to prevent residue buildup.
(2) Check electrical connections and ensure proper grounding before operation.
(3) Calibrate the instrument periodically to maintain measurement accuracy.
(4) Avoid exposure to corrosive liquids or extreme environmental conditions.
(5) Replace worn or damaged parts promptly according to the manufacturer’s instructions.
在线联系供应商
Other supplier products
 |
Automatic radiant protective performance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Outdoor Sports Gear: Evaluating the waterproof breathability and thermal balan... |
 |
Flame Propagation Test for a Single Insulated Cable IEC / EN 60332-1-2，EN 50086 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description: This testermeetthe standards IEC 60332-1-1:2004 in the provisions of technic... |
 |
Scrub Abrasion Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which i... |
 |
UV Color Fade Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Paints & Coatings: Color retention and chalking resistance testing for ex... |
 |
Cork Puncture and Chip Detection Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com The rubber stopper puncture debris detector is a device specifically used to detect the num... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
