Battery Nail Penetration Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Battery Nail Penetration Tester is designed for evaluating the safety performance of lithium-ion batteries and battery packs under extreme internal short-circuit conditions.
The tester simulates thermal runaway caused by mechanical penetration by driving a rust-free steel nail through the center of the largest surface of the battery at a controlled speed and force. The test is conducted at an ambient temperature of 20 °C ± 5 °C, with temperature monitoring to assess battery reaction such as ignition, explosion or thermal instability.
Application
(1) Consumer Electronics Batteries
Lithium-ion batteries used in smarts, tablets, laptops, power banks, Bluetooth ears, smart watches and wearable devices.
(2) Power Tool Batteries
Rechargeable lithium battery packs for electric drills, screwdrivers, garden tools and portable industrial tools.
(3) Electric Vehicle Power Batteries
Cylindrical, prismatic and pouch lithium-ion cells and battery modules used in electric vehicles (EV), electric motorcycles and hybrid electric vehicles (HEV).
(4) Energy Storage Batteries
Lithium battery cells and modules used in residential, commercial and industrial energy storage systems (ESS).
(5) New Energy Battery Systems
Battery packs applied in solar energy storage systems, backup power supplies and communication base stations.
(6) Small Portable Lithium Batteries
Button cells, coin cells and small-capacity lithium batteries used in medical devices, sensors and portable electronic equipment.
(7) Battery Certification & Compliance Testing
Applicable for safety testing in battery manufacturers, third-party laboratories and certification institutions.
Standards
(1) GB/T 18332.2-2001
General Specification for Lithium-Ion Batteries
(2) MT/T 1051-2007
Safety Performance Test Method for Lithium-Ion Batteries Used in Coal Mines
(3) GB/T 31485-2015
Safety Requirements and Test Methods for Power Batteries of Electric Vehicles
(4) GB/T 31241-2014
Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products
(5) UN 38.3
United Nations Manual of Tests and Criteria – Section 38.3 (Transport of Dangerous Goods)
(6) IEC 62133
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Applications
(7) UL 1642:2012
Standard for Lithium Batteries
Features
(1) Controlled nail penetration speed and stable penetration force to ensure repeatable test results.
(2) Supports multiple steel needle diameters to meet different standard requirements.
(3) Hydraulic or motor-driven penetration system for high penetration force stability.
(4) Integrated pressure sensing system with LED force display.
(5) Fully enclosed explosion-proof box design for enhanced operator safety.
(6) Fire-resistant, corrosion-resistant and easy-to-clean structure.
(7) Designed for laboratory and production safety testing environments.
Technical Parameters
| Parameter Category | Specification |
|---|---|
| Nail Diameter | ф2 mm – ф8 mm high-temperature resistant steel needle |
| Penetration Speed | 10 – 40 mm/s |
| Penetration Force | Approx. 2000 kg |
| Stroke | Approx. 200 mm |
| Needle Tip to Base Distance | 250 mm |
| Clamping Distance | 150 mm |
| Driving Mode | Hydraulic drive or motor drive |
| Force Display | Pressure sensing LED display |
| Test Environment | 20 °C ± 5 °C |
| Explosion-Proof Box Size (W × H × D) | Approx. 450 × 750 × 550 mm |
| Explosion-Proof Box Material | Galvanized steel with baked paint finish |
| Machine Dimensions (L × W × H) | Approx. 1640 × 570 × 730 mm |
| Control Box Size (W × H × D) | Approx. 300 × 260 × 170 mm |
| Equipment Weight | Approx. 75 kg |
| Power Supply | Single-phase AC 220 V, 50 Hz |
Accessories
(1) High-temperature resistant steel needles (various diameters).
(2) Temperature measuring thermocouples.
(3) Pressure sensing and display module.
(4) Explosion-proof observation window.
(5) Optional data acquisition and recording system.
Test Procedures
(1) Fix the thermocouple onto the largest surface of the battery under test.
(2) Place the battery in the explosion-proof test chamber.
(3) Select the penetration speed and nail diameter according to the standard.
(4) Drive the steel nail vertically through the center of the battery surface.
(5) Maintain penetration position for 5 seconds.
(6) Observe and record battery reaction and temperature change.
在线联系供应商
Other supplier products
 |
Single - Strand Bending Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possib... |
 |
High Precision Automotive Wire Cross-linked Insulation Test Equipment OEM Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automobile Wire Cross-linking Test Device is designed to evaluate the cro... |
 |
Full Notch Creep Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplas... |
 |
ASTM D6319 Conveyor Belt Fire Resistance Test | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Transmission Belt Flammability and Flame Diffusion Characteristics Tester... |
 |
Dry and Wet Retroreflectometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry... |
Same products
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
