Spring Testers and Testing Machines
The Spring Tension and Compression Testing Machine is designed to accurately evaluate the tensile and compressive deformation, as well as the load characteristics of springs and other elastic devices. With precise control of load, deformation, and displacement, the instrument ensures high-precision measurements. It is suitable for testing springs, rubber components, reeds, and other elastic elements under specified working lengths, providing critical data for quality control, research, and development.
Application
(1) Testing tensile and compressive characteristics of metal springs.
(2) Measuring the deformation and load properties of rubber components.
(3) Evaluating reed and other elastic device performance.
(4) Quality control in spring manufacturing.
(5) Verification of spring performance in automotive suspension systems.
(6) Aerospace component testing to ensure resistance to extreme forces.
(7) Medical device spring testing to meet safety and performance standards.
(8) Product development and design optimization for elastic devices.
(9) Ensuring consistent spring performance in mass production.
Standards
(1) ISO 10243 – Metallic springs – Spring testing methods.
(2) EN 13597 – Springs – Determination of tensile and compression properties.
(3) JB/T 7796-1995, JB/T 7796-2005 – Spring tensile testing machine test methods.
(4) GB/T 13634 – Calibration of dynamometers for testing machines.
(5) JIS B7738-1993 – Spiral spring pressure and tension testing machine.
Features
(1) Accurate Measurement: High-precision force and displacement measurement.
(2) Versatile Force Range: Supports 1%–100% of full scale.
(3) Adjustable Test Speed: 0.5–500 mm/min to accommodate various spring types.
(4) Comprehensive Displacement Control: 170 mm stroke for standard spring sizes.
(5) Multi-Unit Measurement: Supports N, kgf, lbf, and ozf.
(6) Quality Assurance: Enables rigorous testing for production quality control.
(7) Design Support: Provides critical data for R&D and product optimization.
(8) Wide Industry Application: Suitable for automotive, aerospace, medical, and general industrial springs.
Parameters
| Parameter | Specification |
|---|---|
| Force measurement range | 1%–100% FS |
| Test speed | 0.5–500 mm/min |
| Displacement stroke | 170 mm |
| Spring free length | 170 mm |
| Disc diameter | 50 mm |
| Measurement units | N, kgf, lbf, ozf |
| Power supply | AC 220V ±10%, 50Hz |
| Operating temperature | 20 ±10℃ |
| Transport temperature | -27℃ to +70℃ |
Accessories
(1) Host machine
(2) Load cells and fixtures
(3) Clamps for tensile and compression testing
(4) Control panel and display interface
(5) Power supply cable
(6) User manual
Test Procedures
(1) Install the spring or elastic component securely in the appropriate fixture.
(2) Select the measurement mode (tension or compression) and set the test parameters, including load range, displacement, and speed.
(3) Start the test; the machine will apply load and record deformation and force data automatically.
(4) Monitor the measurement display during testing to ensure correct operation.
(5) After completion, stop the machine and remove the tested component carefully.
(6) Record test results and compare with specifications to evaluate spring performance.
(7) Repeat testing if multiple samples or different load conditions are required.
Maintenance Information
(1) Regularly inspect fixtures, load cells, and moving components for wear or damage.
(2) Lubricate guide rails and mechanical parts as recommended by the manufacturer.
(3) Clean the testing area and components after each test to remove debris.
(4) Check electrical connections and control systems periodically to ensure safety.
(5) Store the machine in a clean, dry environment when not in use.
(6) Follow operational safety procedures to prevent injury during testing.
在线联系供应商
Other supplier products
 |
Plastic Pipe Hydrostatic Pressure Burst Tester | The Plastic Pipe Hydrostatic Pressure Burst Tester utilizes an international airless pressure control system. Its core is a dual-CPU control system... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec... |
 |
Flip Phone Durability Tester | Product Introduction: Mobile clamshell testing machine is a special equipment for mobile clamshell fatigue test. Its structure design is reason... |
 |
Putty sanding tester | Standard GB/T 1770 YC/T 315-2009 GB/T 1749-2025 Technical parameters The technical parameters of the putty sanding tester may vary from model ... |
 |
Liquid Spontaneous ignition point tester | Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
