Safety Helmet Impact Acceleration Tester
Purpose
This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.
Standard
GB / T 2812-2006, GB / T 2811-2007
Technical Parameters for Impact Test
Attributes:
Power electronic
Warranty 1 year
Model HZ-8101B
Tester Standard GB / T 2812-2006, GB / T 2811-2007
Impact Hammer 5 ± 0.1kg
Impact Hammer Diameter 96mm
Puncturing Hammer 3 ± 0.5kg
Length of the Puncturing Hammer 40mm
Puncturing Hammer Diameter 28mm
Hardness of the Puncturing Hammer HRC45
Force Transducer Measuring Range 0- 20KN Drop Height 1000mm Display LED Indicator 20KN
Drop height 1000mm
Display LED digital display
Technical Parameters for Penetration Test
1. Weight of the penetration hammer: 3.0 + 0.05kg
2. Angle of the tip of the penetration hammer: 60±0.5°
3. Minimum length of the tip of the penetration hammer: 40mm
4. Hardness: 50 to 45HRC
5. Penetration height: 1000±5mm
在线联系供应商
Other supplier products
 |
Aerosol Foams Flammability Tester | Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi... |
 |
45 Degree Automatic Flammability Tester | 45 Degree Automatic Flammability Testertest instrument is used to detect the flame resistance of the blanket fabric and the flame spread performanc... |
 |
Metal Ring Tribological Wear Tester | Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
 |
Small Parts meter | Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff... |
 |
Shear Fatigue Resistance Tester for Coatings | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
