.

Hot Cold Chamber

Features and Benefits

1.Hotcoldchambercan range from very low temperatures ( -70 ° C or lower) to high temperatures (+180 ° C or higher) to simulate a variety of extreme environments.

2.The internal temperature field is uniform, so that the sample is heated or cooled to a similar degree in temperature control chamber.

3.Precise temperature control and uniformity ensure reliable and repeatable test results, providing a strong basis for product improvement.

4.Hotcoldchambercan highly simulate the alternating cold and hot environment that the product may encounter in actual use, such as the working condition of electronic products in desert high temperature and polar low temperature.

Specifications

Model

STD T-100

STD T-225

STD T-500

STD T-1000

Internal Dimension (mm)

400*500*500

500*600*750

700*800*900

1000*1000*1000

Overall Dimension (mm)

900*1050*1620

1000*1140*1870

1200*1340*2020

1500*1540*2140

Interior Volume

100L

225L

500L

1000L

Heat load

1000W

Temperature Range

A : -20℃~+150 ℃

B : -40℃~+150 ℃

C: -70℃~+150 ℃

Temperature Fluctuation

± 0.5 ℃

Temperature Deviation

± 2.0 ℃

Cooling Rate

1 ℃ / min

Heating Rate

3 ℃ / min

Cooling system

Mechanical compression refrigeration system

Refrigerating unit

French TECUMSEH compressor

Heating Element

Nichrome heater

Controller

Programmable color LCD touch screen controller, Ethernet connection

Water supply system

Automatic water supply, Water purification system

Safety Device

Over-temperature protection;Over-current protection; Refrigerant high-pressure protection; Earth leakage protection


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Rubber hose outer coating wear test chamber
Rubber hose outer coating wear test chamber Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir...
Camera test light box
Camera test light box Standard ISO 12233: Compliant with SFR (Spatial Frequency Response) testing for lens resolution. IEC 62679: Photometric requirements for video ca...
 Monomer combustion test device for building materials
Monomer combustion test device for building materials Meet the standard Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer Co...
Automatic Reaction Calorimeter
Automatic Reaction Calorimeter This instrument is a professional testing instrument that simulates the specific process of chemical reactions on a liter scale, and measures and c...
Rubber Mooney Viscosity Tester
Rubber Mooney Viscosity Tester The Rubber Mooney Viscosity Tester measures the viscosity of rubber under controlled temperature and shear conditions. A rubber sample is loaded in...
供应产品

Same products

Gas Oxidizing Property Tester
Gas Oxidizing Property Tester 卖方: Standard International Group (HK) Limited Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
Battery Powder Compaction Density Measurement System
Battery Powder Compaction Density Measurement System 卖方: Standard International Group (HK) Limited The Battery Powder Compaction Density Measurement System is a precision testing system designed...
Battery Powder resistance tester
Battery Powder resistance tester 卖方: Standard International Group (HK) Limited The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
KES-SESRU surface roughness/friction tester
KES-SESRU surface roughness/friction tester 卖方: Standard International Group (HK) Limited TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...