Electric bicycle lighting device testing machine
An electric bicycle lighting device testing machine is a piece of equipment used to test the lighting devices of electric bicycles, ensuring they meet national standards and safety requirements.
Application
Public, inspection, law, accident investigation, fire emergency lighting, railway, power emergency repair lighting and various outdoor construction operations,
The need of large area and high brightness lighting for maintenance and repair, accident handling and rescue and disaster relief work sites.
Standard
EN 15194:Cycles — Electrically power assisted cycles (EPAC Bicycles)
ISO 4210:Cycles — Safety requirements for bicycles
UL 2849:Standard for Electrical Systems for E-Bikes
ECE R50 StVZO:ECE Regulation No. 50 (Uniform Provisions Concerning the Approval of Motorcycles and Mopeds with regard to Noise) and StVZO (German Road Traffic Licensing Regulations)
Lighting Equipment
Composed of 2 500WLED lights, the lamp parts are fixed on the lamp pole through the rotating head, and the wired controller is used
Or the wireless remote control will stand the light pole from the roof of the car to operate the 360 degree rotating head for all-round search positioning and lighting functions.
Irradiation range: 4 fixed rods are selected as the lifting adjustment mode, with a maximum height of 3.5 meters; Remote control head can adjust the lighting 360 degrees
The shooting Angle, the floodlight coverage radius reaches 30-100 meters.
Product Advantages
Ensures compliance with critical safety and performance standards for e-bike lighting.
Provides accurate and repeatable measurements of photometric and electrical parameters.
Allows for comprehensive evaluation of light distribution and beam patterns.
Facilitates durability testing under simulated environmental and mechanical stresses.
Supports efficient research and development of innovative and reliable lighting solutions.
Contributes to enhanced rider safety and visibility in various conditions.
Helps in meeting regulatory requirements for market access and product certification.
Parameters
| Testing Items | Details |
|---|---|
| Testing Environment | Testing darkroom, 12 meters in length |
| Testing Instruments | Reflector CIL testing system, including A light source, receiver, turntable, and lighting fixture photometric performance testing system |
| Standard Light Source | Class A luminous body specified in CIE Publication No.15 |
| Receiver | Spectral sensitivity of CIE 1931 standard colorimetric observer, aperture angle not greater than 10＇ |
| Lighting System | Equipped with adjustable triangular brackets to fix the A light source and receiver, with an angle fine-tuning range of 0 - 15° |
| Test Turntable | Maximum lifting height of 500mm, free rotation, speed of 1 revolution per minute |
| Reflection Distance | Not less than 10 meters |
| Equipment Power Supply | 220V 50HZ |
Accessoriess
The main components of the electric bicycle lighting device testing machine include a standard A light source, a receiver, a turntable, a lighting distribution performance testing system, an adjustable tripod stand, a test platform, and chromaticity observation equipment.
Test Procedures
Sample Fixing: Secure the electric bicycle sample onto the test equipment fixture.
Air Source Connection: Connect the air source, connect the switch socket, and start the power control button.
Data Calibration: Enter "Equipment Calibration" to calibrate and set analog parameters such as battery voltage, current, and magnetic powder torque.
Permission Settings: Set user access permissions in "Permission Settings" to ensure that operators have the necessary permissions for settings and editing.
Judgment Specifications: Set the judgment specifications for the test results, including speed, torque, and braking distance.
Historical Data Query: Access the historical data query interface through "Query Historical Data," filter test data by start and end times, and support exporting data to an Excel document.
在线联系供应商
Other supplier products
 |
Bag lifting fatigue testing machine | This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven bag and other bags bea... |
 |
Contact heating and cooling tester STD-F7 | The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldness and warmth feeling." The feeling of coldness or warm... |
 |
Prefilled Syringe Plunger Force Tester | The Prefilled Syringe Plunger Force Tester is widely used in the medical device industry, mainly for testing the push - force performance of prefil... |
 |
Activated carbon wear resistance tester | Applicable standards: GB/T 30202.3-2013: This is the wear resistance test standard in the test method of coal-based granular activated carbon for ... |
 |
Walk in High Temperature Environmental Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The High-Temperature Aging Chamber is a critical testing apparatus designed t... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st... |
