Deval abrasion testing machine
The Deval Abrasion Testing Machine is designed to measure the wear resistance of stones and aggregates under dry or wet conditions. It provides reliable evaluation of anti-friction and anti-impact properties, helping to assess aggregate quality for construction and engineering applications. The instrument is widely used in laboratories, quality control units, and research institutions for stone and aggregate testing according to both national and international standards.
Application
(1) Measurement of stone and aggregate wear resistance in highway, railway, and civil engineering projects.
(2) Evaluation of construction materials including crushed stone, gravel, and mineral aggregates for durability and impact resistance.
(3) Testing of decorative stone materials and natural stones for flooring, paving, and façade applications.
(4) Comparative study of dry versus wet abrasion resistance for aggregates.
(5) Quality control in aggregate production plants and laboratories.
(6) Material research and development in universities and research institutes focusing on stone and mineral durability.
Standards
(1) JTG 3432-2024: Aggregate Test Regulations for Highway Engineering, Ministry of Communications, China.
(2) NF P: French Standard for stone abrasion testing.
(3) NS EN : European Standard for mechanical and physical properties of aggregates.
(4) AASHTO T327-2012: Standard Test Method for Deval Abrasion of Coarse Aggregate.
(5) ASTM D6928-10: Standard Test Method for Abrasion Resistance of Coarse Aggregate (Deval Method).
(6) CSA A23.2-23A: Canadian Standard for Deval Abrasion of Aggregates.
(7) CSA A23.2-29A: Canadian Standard for Wear Testing of Aggregates.
(8) UNE 83115: Spanish National Standard for abrasion resistance of aggregates.
Features
(1) Standard Compliance: Fully complies with national, European, French, American, Canadian, and Spanish standards.
(2) Reliable Abrasion Testing: Measures stone and aggregate wear resistance under dry and wet conditions.
(3) High Precision Cylinder: Stainless steel cylinder ensures uniform abrasion and durability.
(4) Adjustable Testing Parameters: Cylinder revolution can be set from 0 to 999,999 revolutions with automatic stop.
(5) Easy Operation: Simple assembly and intuitive operation suitable for laboratory and field use.
(6) Durable Construction: Robust design ensures long-term stability and minimal maintenance.
Parameters
| Parameter | Specification |
|---|---|
| Power supply | AC 220V, 50Hz, 1kW |
| Stainless steel test cylinder | Inner diameter 200mm ±1mm, length 154mm ±1mm, wall thickness 3mm |
| Flat cover thickness | 8mm |
| Ball diameter | 10mm ±0.5mm |
| Cylinder speed | 100 r/min ±5 r/min |
| Cylinder revolution | 0–999,999 revolutions, adjustable with automatic stop |
| Test sample | Stones, aggregates, minerals |
| Operation mode | Dry and wet abrasion testing |
Accessories
(1) Stainless steel test cylinder
(2) Flat cover
(3) Steel balls (abrasion media)
(4) Power cable
(5) User manual
Test Procedures
(1) Place the stone or aggregate sample inside the stainless steel test cylinder.
(2) Add the specified number of steel balls to the cylinder.
(3) Secure the flat cover on the cylinder.
(4) Connect the machine to the power supply and set the desired cylinder speed and revolution count.
(5) Start the machine and allow the cylinder to rotate for the set number of revolutions.
(6) Upon completion, remove the sample and steel balls.
(7) Clean and dry the sample, then weigh it to calculate the abrasion rate.
(8) Record the results and compare with standard values for quality assessment.
Maintenance Information
(1) Regularly inspect the cylinder, cover, and steel balls for wear or damage.
(2) Clean the cylinder and balls after each test to avoid contamination.
(3) Check the motor and electrical connections periodically to ensure safe operation.
(4) Lubricate moving parts as needed according to the manual.
(5) Store the machine in a clean, dry environment when not in use.
(6) Follow safety protocols to avoid injury during operation and maintenance.
在线联系供应商
Other supplier products
 |
Protective Clothing Resistance Test device | Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-st... |
 |
Battery Adiabatic Calorimeter | Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201... |
 |
Coating abrasion resistance tester | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Flame Spread Test Machine | The Flame Spread Test Machine is designed for evaluating the flame spread performance of protective clothing and related materials under controlled... |
 |
Thermal - Cold Cycle meter | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
