Syringe needle flow tester
The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a specified time. It provides accurate and reproducible results for quality control, research, and development of syringes, anesthetic puncture kits, and pre-filled injection systems. The device integrates a test body, syringe fixture, flow meter, and control system for precise testing.
Application
This tester is suitable for a wide range of medical devices, including:
(1) Disposable anesthetic syringes – testing flow rate consistency for anesthesia delivery.
(2) Pre-filled syringes – ensuring accurate dosing and uniform liquid discharge.
(3) Standard hypodermic syringes – assessing flow characteristics for various liquid viscosities.
(4) Infusion needles – evaluating needle performance under different pressures.
(5) Catheter-mounted syringes – verifying flow rate for precise medical application.
(6) R&D and production line quality control – confirming syringe compliance with standards.
Standards
The instrument is designed to meet the following standards:
(1) YY 0321.1: Disposable anesthetic puncture kit (China)
(2) YYB: Stainless steel injection needle for pre-filled and sealed syringes (China)
Optional compliance with international standards:
(3) ISO 7886-1: Sterile hypodermic syringes – Part 1
(4) ISO 8537: Single-use sterile needles and syringes
Features
(1) Measures syringe flow rate accurately over a fixed time interval.
(2) Integrated control system for precise pressure and flow management.
(3) Supports different syringe sizes with customizable fixing fixtures.
(4) Real-time monitoring of test parameters, ensuring reliable results.
(5) Easy-to-use interface for rapid setup and operation.
(6) Compact design suitable for laboratory or production environments.
Parameters
| Parameter | Specification |
|---|---|
| Test pressure | 0 – 400 kPa |
| Pressure resolution | 0.1 kPa |
| Pressure accuracy | ±1% FS |
| Air source interface | 8 mm polyurethane pipe |
| Test interface | 6% Ruhr connector (customizable) |
| Host dimensions (L × W × H) | 325 × 420 × 170 mm |
Accessories
(1) Test body – 1 set
(2) Syringe fixing device – 1 set
(3) Flow meter – 1 set
(4) Control system – integrated
(5) Operation manual – 1 set
(6) Optional connectors and adapters for different syringe types
Test Procedures
(1) Secure the syringe in the fixing device according to its nominal size.
(2) Connect the air source and test interface.
(3) Set the test pressure and duration on the control system.
(4) Start the test; the device will measure the volume of liquid discharged over the specified time.
(5) Record the flow rate data and analyze results for compliance.
Maintenance Information
(1) Keep the device clean and free from liquid or dust ingress.
(2) Inspect the flow meter and syringe fixtures regularly to ensure accurate readings.
(3) Avoid exposing the device to excessive humidity, vibration, or temperature fluctuations.
(4) Calibrate pressure sensors periodically to maintain accuracy.
(5) Follow standard electrical safety guidelines during operation.
在线联系供应商
Other supplier products
 |
Sharp edge tester | Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ... |
 |
Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine | Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
Thermal Conductivity Tester for Silicone and Ceramic Substrates，ASTM D5470 industrial and lab material thermal tester | Thermal Conductivity Tester for Silicone and Ceramic Substrates is a high-precision instrument designed to measure thermal resistance, thermal cond... |
 |
Photovoltaic module wire tube bending testing machine | Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Eu... |
 |
Vacuum Friction and Wear Tester | The Vacuum Friction and Wear Tester integrates a proven friction and wear testing mechanism into a sealed vacuum chamber, enabling reliable tribolo... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
