Melting Materials Dripping Test Machine,NF P92-505、EU 95/28/EC、ECE R118 Annex 7 FTech-NFP92-505
Description：
This tester meet international standards NF P92-505. EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test isadditionaltest for M-class building materials. It is suitable for hot melt material effect in the primary heat source to evaluate the performanceof drippingand burning performance testing. Flexible and thin materials can be tested;
Model:STD-NFP92-505
Standards:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7
Features:
1. All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2. Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3. Sample installation height can be adjusted;
4. The radiation heat of the radiator is 30KW/m2. up to 100KW/m2.
5.Output power of electric radiator: 500W .
6. The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
7.The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm.
8.The heat radiation reachto to3W / cm³ the position 30mm from the radiation shield plane.
9. Sample holder ring is made of stainless steel and the inner diameter is 118mm.
10.Take off the plate inner diameter is 118mm, depth 12mm,internalplug of cotton.
11.Radiation cone can move up and down.
12.Automatic timing warning of sample ignition.
13.OPTION for ECE-R118：MEDTHERM Heat flux transducer inported from the USA
Specification:
1、Dimension: 1000*500*800mm
2、Weight：50kg
在线联系供应商
Other supplier products
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
 |
fabric wet adhesion performance tester | Product Overview The Fabric Wet Adhesion Performance Tester is a precision instrument designed to evaluate the adhesion behavior of clothing fab... |
 |
Helmet Strap Tensile Tester | The helmet strap tensile testing machine is designed to simulate tensile, impact, and durability loads encountered in actual use, accurately evalua... |
 |
Metal Wire Repeated Bending Tester | The Metal Wire Repeated Bending Tester is designed to evaluate the bending fatigue performance of metal wires under repeated stress. It measures th... |
 |
Bundesmann Rain Tester丨Bundesmann Rain Test machine | Introduction The device is a practical test method for rainfall, applicable to clothing products, including waterproof cloth. It is used for mea... |
